B.Tech Mechanical Engineering Colleges in Tamil Nadu

Well, yes! If you are planning to target IITs and NITs for BTech Mechanical Engineering, the tuition fees along with additional hostel and admission charges, make the degree course quite expensive for someone coming from a lower middle-class background. Talking about the tuition fees for IITs, it is between INR 8 Lakh and INR 10 Lakh. Further, NITs charge somewhere around INR 5 Lakh.

Other than this, there are additional charges applicable for hostel accommodation for outstation students and a one-time admission fee as well. Therefore, you must think about your financial situation in advance to come to a conclusion about your preferred engineering institution for pursuing the BTech Mechanical Engineering course.

Know more about -

Mechanical Engineering Colleges in India

It is not compulsory for you to give an entrance test for admission to the BTech Mechanical Engineering course. There are more than 1,050 BTech Mechanical Engineering colleges in India that give admission taking into account the Class 12 marks of students secured in the board exams. These colleges often take extra rounds like the GD or PI for student shortlisting after releasing the merit cutoff lists. 

Having said that, top colleges like the IITs, NITs, and IIITs, along with other colleges require valid entrance exam scores for admission. So, it is better if you work hard and give the entrance test and end up getting excellent marks to keep both the options for admission open. Rest, the choice is completely yours.

For the BTech Mechanical Engineering course in India, several entrance exams can act as a gateway to some of the top colleges in the country.

Students can check the number of colleges that accept specific exam scores and then decide the exam they would like to prepare for afterwards

BTech Mechanical Engineering Exams	BTech Mechanical Engineering Colleges Accepting the Exam Scores
JEE Main	1,672
TNEA Counselling	527
MHT CET	388
AP EAMCET	318
KCET	234
TS EAMCET	193
COMEDK UGET	162
JEE Advanced	41

Note - Some colleges accept multiple entrance exam scores.

A lot. The placement drive for BTech Mechanical Engineering graduates varies based on many things. The college ranking and reputation, industry connections, job profile, recruiter, work location, individual skills, academic records, and project or internship experience, everything matters.

Top mechanical recruiters mostly look for students with a solid practical portfolio and additional certifications that can add great value to their productivity and profits.

Know more about -

Mechanical Engineering Career

No, VIT Vellore BTech admission is not decided through JEE Mains scores. Candidates who wish to apply for BTech must appear in VITEEE only in order to qualify for VIT Vellore admission. No other entrance exams have been mentioned as alternatives to VITEEE.

Hello candidate!

After completing your BTech degree course in Mechanical Engineering, you get exposed to a variety of job profiles that offer you decent salaries such as Manufacturing Engineer, Mechanical Design Engineer, Production Engineer, Automotive Design Engineer, Power Plant Engineer, etc. The average annual salary package for all of these job profiles is above INR 4 LPA, which makes it look very promising for mechanical engineering graduates.

Rest, you should analyze your strengths and interest areas so as to decide well for yourself about the job profile that will suit you the best. Hope this answered your query.

The BTech Mechanical Engineering course fee varies on the basis of the college where you're planning to study the course, whether it is a government college or private college, the college location, All-India ranking, and placement records. The average BTech Mechanical Engineering tuition fee is approximately INR 3 lakh to INR 15 lakh.

Other than the tuition fee, other charges also apply that include the accommodation fee for the college hostel, application fee, semester exam fee, lab work fee, etc. So, it is always better for you to go to the official college websites of your desired colleges to get complete information regarding the detailed fee structure. 

Read more

BTech Mechanical Engg. Course

BTech CSE highest package data is not released. However, the average and median package recorded during IIT Madras BTech CSE placements 2025 was 53.2 LPA and 46 LPA.

According to external sources, NIT Trichy BTech placement highlights 2026 are mentioned below: 

Branch	Highest Package 2026	Student Registered 2026	Students Placed 2026
CSE	INR 64 LPA	127	109
ECE	INR 64 LPA	117	101
EEE	INR 41 LPA	110	81
ICE	INR 41 LPA	105	84
Mechanical	INR 36 LPA	116	88
Chemical	INR 36 LPA	64	51
Civil	INR 36 LPA	86	64
Production	INR 36 LPA	95	73
MME	INR 32 LPA	60	40

BTech is one of the most popular courses of Amrita School of Engineering. When it comes to the placements, the institute offers good placements annually. Check below to learn more.

Particulars	Placement Statistics (2025)
Highest package	INR 80.4 LPA
Average package	INR 9.08 LPA
Top recruiters	Amazon, TCS, Microsoft

Admission to all the BTech courses is subject to JEE Main scores and Class 12 scores(given equal weightage) for 50% of the seats and is subject to Class 12 scores for the remaining 50% of the seats. However, as per the official website, there is no fixed or specific cutoff to get a seat here. It depends on the students who score the highest marks. If a student has appeared for JEE Main then they need to apply under stream 1 of admission. Additionally, as per the data available on the internet, if a student has a score of 90-95% in Class 12 and 50-120 in JEE Main, there is a high possibility of getting admission.

JEE Main 2025 exam date for Session 1 was January 22 to January 31, 2025, and Session was conducted from April 2 to April 9, 2025. NTA (National Testing Agency) announced the JEE Main 2025 exam date. The seat allotment results for Round 4 to Round 6 begain in July 2025.

Your choices and programme options will determine if B.Tech at Saveetha Institute of Medical and Technical Sciences (SIMATS) is superior to Saveetha Engineering College. SIMATS provides a larger range of options, encompassing medical and technological sectors, whereas Saveetha Engineering College is mainly focused on engineering. Assess depending on your unique requirements and interests.

Yes, BE/BTech is available in Sathyabama Institute of Science and Technology. The programme is a four-years course offered in a full-time mode. The UG-level programme is spread across multiple specialisations, including Automobile Engineering, Biomedical Engineering,  Chemical Engineering,  Computer Science and Engineering (Artificial Intelligence), etc. Both the BTech and BE full-time programmes are offered as part-time that last for three and a half years in one and five specialisations, respectively.

General Eligibility: To be eligible for a BTech course under the PSG College of Technology, a General Category candidate should have obtained a minimum aggregate of 45% marks in Physics, Chemistry, and Mathematics (PCM).
Reserved Category Relaxation: Candidates from the BC, MBC, SC, or ST categories should have a minimum aggregate of 40% marks in PCM to be considered for BTech.
The "Cut-off": While these marks are a basic eligibility criterion to allow you to apply, admission to PSG College of Technology is highly merit-based. High marks are a necessity to be competitive with thousands of other applicants through the TNEA process.

In order to get admission to BTech at Vel Tech, students are required to fulfil the minimum eligibility criteria. At Vel Tech, students can get admission to BTech in direct mode as well as through an entrance exam. Direct admission to BTech is merit-based, while for entrance-based admission, students are required to qualify for VTUEEE. It is an in-house entrance exam, which is particularly conducted for Engineering.

Chennai Institute of Technology admission to BTech is completely TNEA counselling based and is conducted by DOTE Chennai. Check out the below table for details on CIT admission process:

Particulars	BTech Admission Highlighs - Chennai Institute of Technology
Eligibility	Class 12/ Diploma in relevant field with 45% aggregate for General category and 40% aggregate for reserved categories
Selection criteria	Single Window Admissions System, i.e.,  TNEA counselling
Name of specialisations	BE: Mechanical | CSE | ECE | EEE | Mechatronics Engineering | Civil | Biomedical | CSE (Cyber Security) | CSE (Artificial Intelligence & Machine Learning) | Electronics Engineering (VLSI Design & Technology) | ECE (Advanced Comm. Technology) BTech: Information Technology | Artificial Intelligence and Data Science | Computer Science and Business Systems

SKCET is a college which offers both engineering as well as technological courses. It has both UG and PG courses. As it is a private college so it's fee structure is little bit high. The fees for BTech students is around INR 200000 for the duration of 4 years or approax ( 25000-30000rs) per semester till 4 years. Students can also opt for integrated M.Tech course for duration of 5 years with fees of around (INR 250000-300000). For those who get admission in SKCET by passing the required examination but are unable to pay the fees are also offered some scholarships. (SC/ST or Backward class people and also Tamil Nadu farmers students) recive scholarship. 

Candidates must have passed Class 12 in Physics, Chemistry & Mathematics, or equivalent with a minimum of 45% aggregate. In addition to this, students need to appear for TNEA counselling or the Single Window Admissions System. Single Window Admissions System is used in Anna University for TNEA (Tamil Nadu Engineering Admission). It is popularly known as Anna University Counselling and is part of the process via which students completing Class 12 apply and secure admission to Engineering colleges within Tamil Nadu. The important strategy is that the counselling is conducted based on rank list, if a student is present for counselling then without allocating a college and course for that student, next rank cannot be allocated with a seat.

For B.E./B.Tech at SRM Easwari Engineering College one should score good in TNEA entrance test as it reflect candidates performance. Admissions are based on the marks obtained by candidates in this exam. Further eligibility to get into B.E./B.Tech at SRM Easwari Engineering College is in 10+2 with 45 percent. For other courses like M.E or M.Tech one should get atleast 50 percent in graduation along with GATE or CEETA.

The total fee for HITS Chennai is cumulative of several components, such as tuition fees, caution money, hostel fees, insurance, etc. Students have to pay the admission fees after the final selection. The fee can vary from one BTech specialisation to another. The table below further showcases the Hindustan University BTech fee structure:

Course Name	One-Time Fee	Tuition Fee	Hostel Fee
BTech	INR 8,500	INR 1.8 Lacs - INR 13.02 lakh	INR 2.96 lakh

NOTE: The above-mentioned fee is taken from the official website/sanctioning body. It is still subject to changes and hence, is indicative.

Admission to BTech course is based on JEE Main/ KEE score. KEE or Karunya Entrance Examination conducted every year for admission to UG courses of Engineering, Agriculture, Biosciences, Criminology, Management, Media, Design, Nursing, Health science, Data Science, Forensic Science, Commerce, Nanoscience, Optometry. After completion of the selection rounds, shortlisted candidates are called for counselling and document verification. Candidates need to pay the course fee to confirm their admission.

KPR Institute of Engineering and Technology admissions are currently open. Candidates need to register for TNEA for BE/ BTech admission. For PG, aspirants must first apply for accepted entrance exam and then at the official website of the institute for admission. Admission to KPRIET courses is both merit and entrance-based.

The total seats offered for B.E. / B.Tech at Karunya Institute of Technology and Sciences and KEC - Kongu Engineering College are 2060 and 1770, respectively. While Karunya Institute of Technology and Sciences offers this course in 37 specialisations, KEC - Kongu Engineering College offers the same in 14 specialisations. Hence, there are higher chances of getting a seat at Karunya Institute of Technology and Sciences due to higher seats.

The TNEA 2026 dates for the counselling process will be announced in the coming days after AICTE approval.