

M.Tech. in Design of Mechanical Systems at HITS Overview
Hindustan Institute of Technology and Science offers M.Tech. in Design of Mechanical Systems course for a duration of 2 years. The institution offers this course in Full Time mode at the PG level. With a total tuition fee of INR 1,75,000 this course is offered in the stream of Engineering. Additionally, candidates must pay a hostel fee of INR 1,48,000 (if taking hostel accommodation) and a one-time admission fee of INR 8,500 to confirm their seat at Hindustan Institute of Technology and Science. The college has ranked at #101-150 in NIRF 2024 under the Engineering category. Check other details of Hindustan Institute of Technology and Science M.Tech. in Design of Mechanical Systems in the below page.
Total Tuition Fees | ₹1.75 Lakh Get Fees details |
Duration | 2 years |
Course Level | PG Degree |
Mode of Course | Full Time |
Type of University | Deemed |
M.Tech. in Design of Mechanical Systems at HITS Fees
The Hindustan Institute of Technology and Science M.Tech. in Design of Mechanical Systems fee is inclusive of components such as Tuition Fees, One-Time Fees, Registration Fees, Exam Fees, and others. Also, candidates may be required to pay extra fees that are specific to the institution. The total tuition fee for the M.Tech. in Design of Mechanical Systems program at Hindustan Institute of Technology and Science is INR 1,75,000. More information on the Hindustan Institute of Technology and Science M.Tech. in Design of Mechanical Systems fee is as follows:
| Fee components | Amount (2 years) |
|---|---|
₹ 1.75 Lakh | |
Fee mentioned above is as per latest information available.
Fee is calculated on the basis of 1st Year. Actual amount may vary.
Hostel fee mentioned above is for cheapest option available. For other Fee mentioned above is as per latest information available.
Fee is calculated on the basis of 1st Year. Actual amount may vary.
Hostel fee mentioned above is for cheapest option available. For other options available, please refer to fee pdf.
Meal Plan is not included in mentioned fee. | ₹ 1.48 Lakh |
One-time Payment includes Insurance, Examination and Convocation. | ₹ 8,500 |
₹ 3.31 Lakh |
M.Tech. in Design of Mechanical Systems at HITS Rankings
According to NIRF in 2024, HITS ERP has held its #101-150 position for the M.Tech. in Design of Mechanical Systems course for the academic year 2024. While this ranking applies to all specialisations offered under M.E./M.Tech, not just M.Tech. in Design of Mechanical Systems, below, candidates can find the detailed breakdown of Hindustan Institute of Technology and Science's recent rankings for M.Tech. in Design of Mechanical Systems:
M.Tech. in Design of Mechanical Systems at HITS Highlights
- Applications Open | Apply @ www.bit.ly/HITS-22?open-reg
M.Tech. in Design of Mechanical Systems at HITS Curriculum
Candidates can download the latest HITS ERP M.Tech. in Design of Mechanical Systems curriculum from the link below. The curriculum PDF provides the complete semester-wise course structure, along with electives and detailed course content. Prospective candidates who wish to apply for admission to the M.Tech. in Design of Mechanical Systems program can check the full course curriculum here:
M.Tech. in Design of Mechanical Systems at HITS Frequently Asked Questions
No, Hindustan University offers admission to all of its courses based on a valid score in the respective entrance exams. For the majority of UG courses from the streams of Science, Commerce, Humanities, Management and Law, the university conducts an in-house entrance exam, i.e., HITSCAT. For BTech course, students can apply via HISEEE, which is also an in-house entrance exam of Hindustan University. Apart from that, students can also get admission to various national level entrance exams such as CLAT/ GATE/ UGC NET, for specific courses. To find course-wise details for the accepted entrance exam, click here.
Hindustan Institute of Technology and Science is a private university, and the institute was established in 1985. It is located in Kelambakkan and was conferred the status of a university under the name HITS. This is a deemed-to-be- University is also accreditted A by NAAC. The institute is recognised by UGC and approved by AICTE.
Hindustan University offers good placements annually for its various courses like MBA, BPharma and BTech, etc. As per the latest report, a total of 1,364 students were placed and 93.94% placement rate was recorded during Hindustan University placements 2024. Further, the the highest package offered during the 2022 placement drive stood at INR 12.75 LPA. The key highlights of Hindustan University placements for the Class of 2023 and 2024 are tabulated below:
Particulars | Placement Statistics (2023) | Placement Statistics (2024) |
|---|---|---|
Average package | INR 4.5 LPA (BArch) INR 4.65 LPA (BTech) | INR 4.5 LPA (BArch) INR 4.60 LPA (BTech) |
Students strength | 1,445 | 1,452 |
Total students placed | 1,384 | 1,364 |
Placement rate | 95.78% | 93.94% |
In order to get admission to BTech at Hindustan University, the minimum eligibility criteria is to pass Class 12 with minimum 50% aggregate in PCM as subjects. Those who belong to the reserved category are required to get 45% aggregate. The university also offers admission to BTech (Lateral Entry). The minimum eligibility criteria for the same is to either get a Diploma with minimum 50% aggregate in the branch of Engineering/ Technology from the State Board of Technical Education and Training, Tamil Nadu or graduate with minimum 50% aggregate in Science and Mathematics as one of the main subject. The candidate should fall in the age group from 19 to 22 years.
The Hindustan University average package offered to BTech and BArch students during Hindustan University placements 2024 stood at INR 4.60 LPA and INR 4.50 LPA, respectively. The following table showcases the Hindustan University packages offered in 2024 placement drive:
Course | Average Package (2024) |
|---|---|
BTech | INR 4.6 LPA |
MTech | INR 4.5 LPA |
MBA | INR 4.5 LPA |
BArch | INR 4.5 LPA |
Note: The above-mentioned packages are taken from the official website. These are assumed as average packages as only salary was mentioned on the official website.
M.Tech. in Design of Mechanical Systems at HITS Placements
| Particulars | Statistics (2024) |
|---|---|
| Median Salary | INR 4.20 Lakh |
| % Batch placed | 91.42 |
M.Tech. in Design of Mechanical Systems at HITS Entry Requirements
M.Tech. in Design of Mechanical Systems at HITS Admission Process
- : Register and ApplyApplications Open | Apply @ www.bit.ly/HITS-22?open-reg Interested candidates can apply online with the required information.
- Entrance TestEligible candidates need to appear for the Hindustan Institute of Technology and Science Masters Entrance Examination (HITSMEE) conducted by the Hindustan University.
- CounsellingAdmission is through counselling based on the rank obtained in HITSMEE.
Important Dates
Explore Courses offered by HITS
Other courses offered by HITS
Get best suited colleges for you in real-time
Tell us about your city, course, budget & more
Discover best colleges that meet all your needs
Compare Courses From Similar Colleges
Similar courses in the same city
M.Tech. in Information Technology (Artificial Intelligence and Data Science)
Offered by Anna UniversityM.Tech. in Design of Mechanical Systems at HITS Students also asked
Hindustan Institute of Technology and Science offers a large diversity of courses to students in various fields. Hindustan Institute of Technology and Science admissions are held on the basis of both merit and entrance tests. Students seeking course admissions must clear their previous qualifying examination and appear for any of the prescribed entrance exams such as HITSEEE, HITSCAT, NATA, among others. Students can visit the official website to learn more regarding the course-wise eligibility and specialisation details.
Hindustan Institute of Technology and Science, also known as HITS, was established in 1985 and is located in Kelambakkan, Chennai. It is a member of AIU and is accredited by the IAO, NBA, and NAAC with an 'A' Grade. Further, it is a deemed-to-be University and is recognised by the UGC. At present, the university offers more than 100 courses in diverse streams such as Engineering, Management, Law, Humanities, Science, and more. Apart from this, the university has a sprawling campus of over 150 acres with all the modern facilities.
A total of 1590 seats are available for BTech programmes at HITS Chennai. The seat intake varies for each of the course specialisation. Hindustan Institute of Technology and Science has the highest seat intake for CSE course - 480, followed by aerospace engineering and aeronautical engineering with 180 seats. The seat allotment is carried out based on HITSEEE scores. It must be taken into account that the mentioned seat intake is as per the official website/sanctioning body. It is still subject to changes and hence, is indicative.
The total tuition fee for the BTech course ranges between INR 1.8 Lakhs to INR 13 lakhs. Apart from this, the candidate also has to pay hostel and one-time fee to pursue BTech course at Hindustan Institute of Technology and Science commonly known as Hindustan University.
Student Forum
Content authored by:
M.Tech. in Design of Mechanical Systems at HITS News & Updates


M.Tech. in Design of Mechanical Systems at HITS Contact Information
Useful Links
Know more about HITS
- All About HITS
- Courses 2026
- Fees 2026
- Reviews on Placements, Faculty & Facilities
- Admission 2026 - Cutoffs, Eligibility & Dates
- Placement - Highest & Average Salary Package
- Cut off & Merit List 2026
- HITS Rankings
- Gallery 2026
- Infrastructure Details & Reviews
- HITS Faculty
- Compare HITS
- HITS Q&A
- Scholarships
- HITS News & Articles
Know more about Programs
- Engineering
- Mechanical Engineering
- M.E./M.Tech
- Food Technology
- Instrumentation Technology
- BTech Chemical Engineering
- AI & ML Courses
- Aeronautical Engineering
- BTech Petroleum Engineering
- Petroleum Engineering
- VLSI Design
- MTech in Computer Science Engineering
- Metallurgical Engineering
- BTech Robotics Engineering
- BTech in Biotechnology Engineering