

M.Tech. in Mechanical Engineering (Production and Industrial)
- A++ NAAC accredited
- Public/Government University
- Estd. 1920
M.Tech. in Mechanical Engineering (Production and Industrial) at Jamia Millia Islamia Overview
M.E./M.Tech in M.Tech. in Mechanical Engineering (Production and Industrial) at Jamia Millia Islamia is a 2 years programme offered in a Full Time mode. This programme is offered at the PG level. The total tuition fee for the entire duration of this programme is INR 42,750. The total seat capacity for this course is 10. Candidates can check the details around M.Tech. in Mechanical Engineering (Production and Industrial) course offered at Jamia Millia Islamia in the table provided below:
Total Tuition Fees | ₹42,750 Get Fees details |
Duration | 2 years |
Course Level | PG Degree |
Mode of Course | Full Time |
Official Website | Go to Website |
Seat breakup | 10 |
Type of University | Public/Government |
M.Tech. in Mechanical Engineering (Production and Industrial) at Jamia Millia Islamia Fees
Tuition, one-time fees, registration fees, test fees, and other costs are all included in Jamia Millia Islamia M.Tech. in Mechanical Engineering (Production and Industrial) fee. Depending on the split of the cost for the most recent year, the candidates may be required to pay additional fees. INR 42,750 is the entire amount of tuition for M.Tech. in Mechanical Engineering (Production and Industrial) at Jamia Millia Islamia.
| Fee components | Amount (2 years) |
|---|---|
The fees might include components other than tuition fees | ₹ 42,750 |
Meal Plan is included in mentioned fee.
Hostel fee is calculated on the basis of 1st year. Actual amount may vary.
The fees might include components other than hostel fees.
Mentioned Hostel Fee is for Meal Plan is included in mentioned fee.
Hostel fee is calculated on the basis of 1st year. Actual amount may vary.
The fees might include components other than hostel fees.
Mentioned Hostel Fee is for Year 2024. | ₹ 79,900 |
₹ 1.23 Lakh |
- Highlights
- Placements
- Infrastructure
- Campus Life
M.Tech. in Mechanical Engineering (Production and Industrial) at Jamia Millia Islamia Rankings
According to NIRF in 2024, Jamia Millia Islamia has held its #24 position for the M.Tech. in Mechanical Engineering (Production and Industrial) course for the academic year 2024. While this ranking applies to all specialisations offered under M.E./M.Tech, not just M.Tech. in Mechanical Engineering (Production and Industrial), below, candidates can find the detailed breakdown of Jamia Millia Islamia's recent rankings for M.Tech. in Mechanical Engineering (Production and Industrial):
M.Tech. in Mechanical Engineering (Production and Industrial) at Jamia Millia Islamia Frequently Asked Questions
Yes, Common University Entrance Test (CUET) 2026 registration commenced at cuet.nta.nic.in. NTA released the CUET 2026 notification on January 03 and reopened the window on February 23. Soon after the release of the CUET official notification, the CUET registration 2026 process commenced online at the official website. Candidates willing to appear for the CUET 2026 exam must have completed complete the application form online. Additionally, before filling application form, candidates must make sure that they have fulfilled the prescribed CUET eligibility criteria to qualify for the entrance exam.
Yes, Jamia Millia Islamia accepts CUET scores for UG courses such as BA, BSc and BVoc. Jamia Millia Islamia admission is based on entrance exam score. The university released its prospectus for admissions in March with the schedule for admission to courses accepting national-level and university-level entrance exams. JMI, New Delhi offers over 220 courses in both regular and self-financed modes. The university also provides distance learning courses at undergraduate (UG), postgraduate (PG), and Diploma levels.
The highest salary offered to MCA and MSc Bioinformatics students during the placements 2025 was INR 18.5 LPA and INR 6 LPA, respectively.
Earlier, the overall the highest salary for JMI placements 2024 stood at INR 59.91 LPA. This was offered to BTech Computer Engineering student. The second the highest salary was INR 24 LPA and was bagged by MBA students.
According to the Overall NIRF reports 2024 released by both the Universities, the key highlights of JMI and DU placements 2023 for UG 3-year and PG 2-year programmes are presented below:
Particulars | JMI Placement Statistics (2023) | DU Placement Statistics (2023) |
|---|---|---|
UG 3-year median package | INR 6 LPA | INR 5.5 LPA |
UG 3-year total students | 1041 | 266 |
UG 3-year students placed | 439 | 190 |
UG 3-year students opted for higher studies | 602 | 76 |
PG 2-year median package | INR 9.25 LPA | INR 16 LPA |
PG 2-year total students | 1426 | 6557 |
PG 2-year students placed | 893 | 1253 |
PG 2-year students opted for higher studies | 533 | 590 |
The salary details for UG courses is out for JMI placements 2024, which are as follows:
| Course | the highest Salary 2024 |
|---|---|
| BTech | INR 59.91 LPA |
| BSc Aeronautics | INR 5.72 LPA |
| BA English | INR 3.2 LPA |
| BArch | INR 4.5 LPA |
| BCom | INR 3.2 LPA |
Download exam sample paper
M.Tech. in Mechanical Engineering (Production and Industrial) at Jamia Millia Islamia Placements
| Particulars | Statistics (2022) |
|---|---|
| Median Salary | INR 13.00 Lakh |
M.Tech. in Mechanical Engineering (Production and Industrial) at Jamia Millia Islamia Entry Requirements
M.Tech. in Mechanical Engineering (Production and Industrial) at Jamia Millia Islamia Admission Process
Important Dates
Explore Courses offered by Jamia Millia Islamia
Other courses offered by Jamia Millia Islamia
Get best suited colleges for you in real-time
Tell us about your city, course, budget & more
Discover best colleges that meet all your needs
Compare Courses From Similar Colleges
Similar courses in the same city
M.Tech. in Machine Intelligence and Data Science
Offered by IIT Delhi - Indian Institute of TechnologyDiscontinued (Oct 2025)- M.Tech. in Computer Science
Offered by Netaji Subhas University of TechnologyM.Tech. in Computer Science and Engineering (Analytics)
Offered by NIT Delhi - National Institute of TechnologyM.Tech. in Computational Biology
Offered by IIIT Delhi - Indraprastha Institute of Information TechnologyDiscontinued(Oct 2025)- M.Tech. in Artificial Intelligence
Offered by Netaji Subhas University of Technology (East Campus)M.Tech. in Computer Science and Engineering (Artificial Intelligence)
Offered by Indira Gandhi Delhi Technical University for Women (IGDTUW)M.Tech. in Mechanical Engineering (Production and Industrial) at Jamia Millia Islamia Students also asked
After JEE session 2 is completed, only those candidates who are aiming for IITs need to start preparing for JEE Advanced after clearing JEE Main. Those who are above the 98th percentile should start preparing for JEE Advanced as soon as possible. Those below this, between the 95th and 98th percentile, should focus on attempting more mock tests and previous year question papers so that they have a better chance of clearing JEE Advanced
Jamia Millia Islamia cutoff 2025 has been released across multiple specialisations. Based on Round 1 seat allotment results, BTech cutoff rank stood between 43789 and 256264 for General AII India category students. So, considering Round 1 cutoff, students seeking admission to UNIRAJ must secure over and above cutoff rank 43789 under unreserved quota.
Jamia Millia Islamia offers seat reservations in almost all the courses based on the category of the students. Candidates seeking JMI admission under the reserved category can apply for reservation under one category only and are required to fulfil the prescribed eligibility conditions of the course. More details regarding JMI reservation criteria are enlisted below:
- 30% of the total number of seats in each course are reserved for Muslim applicants. 10% of the total number of seats in each course are reserved for women applicants
who are Muslims and 10% of the total number of seats in each course shall be earmarked for (OBCs) and ST students who are Muslims. - 5% of seats in all the courses are reserved for physically challenged students.
- 5% of seats in all courses must be filled by internal students of Jamia who have passed their qualifying exam from Jamia schools as regular students.
More details on the reservation criteria and relaxation offered to students across course eligibility are available in the official 2023 prospectus of JMI.
To get admission at Jamia Millia Islamia in BA course, the score needed is between 45% to 50% based on different specialisations. Interested students need to visit official website of JMI and check admission details and eligibity criteria of course they want to apply.
The university is known for good placements, especially in Engineering & Management. In 2024, the top package for B.Tech Computer Engineering was INR 59.91 LPA. Some programs also reported 100% placements. According to the overall and stream-wise JMI NIRF reports 2024 released, the number of students placed over the past three years during JMI placements is presented below:
Course | Placement Rate (2021) | Placement Rate (2022) | Placement Rate (2023) |
|---|---|---|---|
BTech | Total students: 358 Students placed: 234 | Total students: 359 Students placed: 270 | Total students: 353 Students placed: 292 |
MTech | Total students: 158 Students placed: 98 | Total students: 161 Students placed: 120 | Total students: 157 Students placed: 126 |
MBA | Total students: 69 Students placed: 64 | Total students: 72 Students placed: 63 | Total students: 63 Students placed: 60 |
BA LLB | Total students: 60 Students placed: 42 | Total students: 65 Students placed: 53 | Total students: 66 Students placed: 51 |
LLM | Total students: 30 Students placed: 27 | Total students: 33 Students placed: 29 | Total students: 30 Students placed: 23 |
BArch | Total students: 40 Students placed: 31 | Total students: 44 Students placed: 32 | Total students: 40 Students placed: 37 |
MArch | Total students: 130 Students placed: 98 | Total students: 124 Students placed: 93 | Total students: 136 Students placed: 113 |
BDS | Total students: 47 Students placed: 37 | Total students: 48 Students placed: 27 | Total students: 47 Students placed: 31 |
Overall UG 3-year | Total students: 997 Students placed: 298 | Total students: 1051 Students placed: 397 | Total students: 1041 Students placed: 439 |
Overall PG 2-year | Total students: 1354 Students placed: 766 | Total students: 1356 Students placed: 804 | Total students: 1426 Students placed: 893 |
Student Forum
Content authored by:
M.Tech. in Mechanical Engineering (Production and Industrial) at Jamia Millia Islamia News & Updates




M.Tech. in Mechanical Engineering (Production and Industrial) at Jamia Millia Islamia Contact Information
Jamia Millia Islamia, Jamia Nagar
Delhi
(For general query)
(For admission query)
(For general query)
(For admission query)
Useful Links
Know more about Jamia Millia Islamia
- All About Jamia Millia Islamia
- Courses 2026
- Fees 2026
- Reviews on Placements, Faculty & Facilities
- Admission 2026 - Cutoffs, Eligibility & Dates
- Placement - Highest & Average Salary Package
- Cut off & Merit List 2026
- Jamia Millia Islamia Rankings
- Gallery 2026
- Infrastructure Details & Reviews
- Jamia Millia Islamia Faculty
- Compare Jamia Millia Islamia
- Jamia Millia Islamia Q&A
- Scholarships
- Jamia Millia Islamia News & Articles
Know more about Programs
- Engineering
- Mechanical Engineering
- M.E./M.Tech
- Food Technology
- Instrumentation Technology
- BTech Chemical Engineering
- AI & ML Courses
- Aeronautical Engineering
- BTech Petroleum Engineering
- Petroleum Engineering
- VLSI Design
- MTech in Computer Science Engineering
- Metallurgical Engineering
- BTech Robotics Engineering
- BTech in Biotechnology Engineering