B.Tech Mechatronics Engineering Colleges in Tamil Nadu

There is enough room for innovation and creativity in the BTech Mechatronics engineering course, where you can put to use your dedication, passion, and creativity, coupled with electrical, mechanical, and electrical domain knowledge, to innovate smart robots and electronic systems. In this digitalized world when everything is going automatic and governed by robotic systems, a BTech degree in Mechatronics Engineering can do wonders if put to use the right way.

Know more about -

Mechatronics Engineering Courses

You can learn so many skills from the BTech in Mechatronics Engineering course, both through classroom lectures and practical exposure via lab classes and project work. You can check some important skills learned during the course duration given here:
Proficiency in Computer Programming
Knowledge of Control Systems
Robot Design
Automation Techniques
CAD/CAM Software
Electronics & Instrumentation

You must research well on your part about the college coursework structure. See the course fees, teaching faculty expertise, hands-on training opportunities, placements,  and alumni feedback, which serve as a testimony for the reputation and ranking of the college.
Only after proper research and analysis should you take the final call for admission at the college, as the 4-year academic ride would be a stepping stone to a fulfilling career journey ahead. Make sure you make it count. Best wishes!

Know more about -

Mechatronics Engineering Courses

SRMIST CSE average package offered during 2026 placement drive is not released. Overall average package recorded in 2026 was 7.3 LPA.

The placement rate for BTech has not been released yet. When out it will be updated on this page. In the meantime, students can have a look at the total students and the nymber of students placed in recent years at SASTRA University:

 

Yes, BE/BTech is available in Sathyabama Institute of Science and Technology. The programme is a four-years course offered in a full-time mode. The UG-level programme is spread across multiple specialisations, including Automobile Engineering, Biomedical Engineering,  Chemical Engineering,  Computer Science and Engineering (Artificial Intelligence), etc. Both the BTech and BE full-time programmes are offered as part-time that last for three and a half years in one and five specialisations, respectively.

In order to get admission to BTech at Vel Tech, students are required to fulfil the minimum eligibility criteria. At Vel Tech, students can get admission to BTech in direct mode as well as through an entrance exam. Direct admission to BTech is merit-based, while for entrance-based admission, students are required to qualify for VTUEEE. It is an in-house entrance exam, which is particularly conducted for Engineering.

Chennai Institute of Technology admission to BTech is completely TNEA counselling based and is conducted by DOTE Chennai. Check out the below table for details on CIT admission process:

Particulars	BTech Admission Highlighs - Chennai Institute of Technology
Eligibility	Class 12/ Diploma in relevant field with 45% aggregate for General category and 40% aggregate for reserved categories
Selection criteria	Single Window Admissions System, i.e.,  TNEA counselling
Name of specialisations	BE: Mechanical | CSE | ECE | EEE | Mechatronics Engineering | Civil | Biomedical | CSE (Cyber Security) | CSE (Artificial Intelligence & Machine Learning) | Electronics Engineering (VLSI Design & Technology) | ECE (Advanced Comm. Technology) BTech: Information Technology | Artificial Intelligence and Data Science | Computer Science and Business Systems

At Sri Krishna College of Engineering and Technology (SKCET) in Coimbatore, Tamil Nadu, the price of the B.Tech MCA (Master of Computer Applications) programme is INR 70,000–two hundred,000 per 12 months, or around INR 25,000–30,000 every semester. TANCET, WBJEE JECA, UPSEE, TSICET, or other admission examinations are required for the direction. The university's 2023 placement attempt is already over. The maximum package deal supplied at some stage in Sri Krishna College of Engineering placements in 2023 turned into INR forty six LPA, while the average bundle changed into INR 6 LPA, in line with the file that changed into made public. Additionally, for the duration of Sri Krishna College of Engineering and Technology placements 2023, 232 agencies visited the campus, and the university suggested a ninety seven% placement fee. For placements The groups like Infosys, Tech Mahindra, Capgemini, and lots of different groups visited our college and selected the students. In addition you can check the official website.

The total fee for HITS Chennai is cumulative of several components, such as tuition fees, caution money, hostel fees, insurance, etc. Students have to pay the admission fees after the final selection. The fee can vary from one BTech specialisation to another. The table below further showcases the Hindustan University BTech fee structure:

Course Name	One-Time Fee	Tuition Fee	Hostel Fee
BTech	INR 8,500	INR 4.76 Lacs - INR 13.02 lakh	INR 2.96 lakh

NOTE: The above-mentioned fee is taken from the official website/sanctioning body. It is still subject to changes and hence, is indicative.

KPR Institute of Engineering and Technology admissions are currently open. Candidates need to register for TNEA for BE/ BTech admission. For PG, aspirants must first apply for accepted entrance exam and then at the official website of the institute for admission. Admission to KPRIET courses is both merit and entrance-based.

The total seats offered for B.E. / B.Tech at Karunya Institute of Technology and Sciences and KEC - Kongu Engineering College are 2060 and 1770, respectively. While Karunya Institute of Technology and Sciences offers this course in 37 specialisations, KEC - Kongu Engineering College offers the same in 14 specialisations. Hence, there are higher chances of getting a seat at Karunya Institute of Technology and Sciences due to higher seats.

The curriculum of both BE and BTech programmes is divided into eight semesters. The table below lists few specialisations offered under BE and BTech programmes along with seat inatke: 

Courses	Seats
B.E. in Aeronautical Engineering	60
B.Tech. in Artificial Intelligence and Data Science	180
B.Tech. in Artificial Intelligence and Machine Learning	180
B.E. in Automobile Engineering	30
B.E. in Biomedical Engineering	120

 

For admission to the TCE BTech programme, all interested candidates are required to register and appear for TNEA counselling. To participate in the counselling process, aspirants must pay the below application fees:

Category	Application Fees
General category	INR 500
SC/SCA/ST category belonging to Tamil Nadu	INR 250

Note: The above-mentioned fee is as per the official sources. However, it is indicative and subject to change.

Candidates are required to fulfil the eligibility criteria to apply for BTech at Kumaraguru College of Technology. Aspirants need to complete Class 12 with at least 45% aggregate to apply for BTech programme. Hence, candidates with 60% aggregate in Class 12 can get admission to BTech programme.

SRM TRP Engineering College and Sona College of Technology both are renowned universities for B.E. / B.Tech. However, in terms of affordability, SRM TRP Engineering College is a better option since the total tuition fee for SRM TRP Engineering College is INR 150,000 - INR 200,000 and the total tuition fee for B.E. / B.Tech at Sona College of Technology is INR 200,000 - INR 360,000. In the total fees that students generally end up paying the university or the college, various other components are also included, such as the exam fee, application fee, lab and other charges.

Sri Sairam Engineering College BTech fees is INR 2 Lacs - INR 2.5 lakh. Sri Sairam Engineering College fee structure includes many components. The total fees may differ at the time of payment due to the variables of the fee structure.

You have to apply on the official TNEA website - tneaonline.org.

VIT Chennai provides BTech in various specialisations. These specialisations are mentioned in the below table:

VIT Chennai BTech Specialisations
Mechanical Engineering	Computer Science and Engineering	Electrical and Electronics Engineering
Electronics and Communication Engineering	Electronics and Computer Engineering	Fashion Technology
Computer Science and Engineering with Specialisation in Artificial Intelligence and Machine  Learning	Computer Science and Engineering with Specialisation in Cyber Physical Systems	Computer Science and Engineering with Specialisation in Artificial Intelligence and Robotics
Mechatronics and Automation	Mechanical Engineering with specialisation in Electrical Vehicles	-

Yes, KCG College of Technology gives BE and BTech courses for a duration of four years. The college offers Bachelor of Engineering and Bachelor of Technology courses in multiple specialisations. For admissions to these courses, a student should fulfil the eligibility criteria that states, an applicant should complete their HSC with 45% in PCM or Vocational studies.

 

 

Agni College of technology provides great placements to its students with good packages. Refer to the table below to know more placement statistics recorded in the recent years:

Particulars	Placement Statistics (2024)	Placement Statistics (2025)
Placement rate	95%	96%
Offers Made	523	648
the highest Package	INR 50 LPA	INR 49 LPA
Average Package	INR 4.40 LPA	INR 4.60 LPA
Companies Visited	141	148