B.Tech Chemical Engineering Colleges in India

If the candidates are applying for BTech courses other than BTech in Biotechnology, then the JEE Mains is a mandatory entrance exam for GGSIPU admission. For BTech in Biotechnology admission, candidates need to appear in either the IPU CET or CUET-UG.

Lateral entry BTech admissions at GGSIPU are done on the basis of merit in IPU CET.

Multiple-choice questions will be asked in HITSEEE exam to check students' proficiency in fundamental subjects, including Maths, Physics, Chemistry, English, General Knowledge. The top scorers at national level will get a merit-based scholarship to do their graduate studies at HITS.

AP EAMCET application form 2026 will be available with a late fee till April 10, 2026. The late fee amount will vary depending on the date of submission of the application form. The application fee payment and submission of the application form have to be done before the last date to avoid a late fee.

As per my knowledge yes, KPR Institute of Engineering and Technology does have a fee refund policy. As I have heard about their policy, if a student withdraws their admission before approval maybe or may not be able to get the full amount After approval - The approval fee and tuition fee for the number of days you have attended the classes will be deducted.

The total seats offered for B.E. / B.Tech at Karunya Institute of Technology and Sciences and KEC - Kongu Engineering College are 2060 and 1770, respectively. While Karunya Institute of Technology and Sciences offers this course in 37 specialisations, KEC - Kongu Engineering College offers the same in 14 specialisations. Hence, there are higher chances of getting a seat at Karunya Institute of Technology and Sciences due to higher seats.

Compare the BTech fee and median package of few NITs below:

Institute	Total Fee in Lakhs	BTech Median Package LPA
NIT Agartala	3.5 - 5	6
NIT Meghalaya	5	6.5
NIT Arunachal Pradesh	5	6.5

Note: The amount is in INR and taken from various sources, hence may change.

The BTech programmes application fee at the Institute of Technology, Nirma University, is INR 1,500. Candidates need to pay this amount in order to apply for their desired course. For students appearing for the qualifying examination from the state of Gujarat, as well as students from Diu, Daman, and Dadra Nagar Haveli, the application fee is INR 350. Applicants from other regions also need to pay INR 1,200. The application fee may be remitted via a number of online payment options, including credit and debit cards, among others.

NOTE: The mentioned fee is taken from the official website/sanctioning body. It is still subject to change and, hence, is indicative.

IIIT Allahabad accpets JEE Main score for admission to the BTech courses. As per the IIIT Allahabad cutoff 2023, the Last Round closing rank for BTech ranged between 5924 and 9558, among which Information Technology was the most competitive specialisation. The Round 1 closing rank for BTech ranged between 4817 and 8428 for BTech. 

So, considering the previous year Round 1 and the Last Round closing ranks, candidates seeking admission to IIIT Allahabad must secure a rank over and above 4800 and 9600 for the General ALL India category candidates. 

Candidates can refer to the table given below to check out the 2023 Last Round closing ranks for IIIT Allahabad to get an idea of the ranks required for all the BTech courses offered at this institute: 

Course	Round 1	Last Round
B.Tech. in Electronics and Communication Engineering	8428	9558
B.Tech. in Information Technology	4817	5924
B.Tech. in Information Technology (Business Informatics)	5162	6587

Entrance exam scores do NIT Mizoram accept for admission to B.Tech is as follows

You have to take the JEE MAINS exam to get into NIT MIZORAM. 

You have to get a rank between 45761 and 91756 for General All India category students as of JEE MAINS 2023 results. 

The score varies every year depending on the difficulty of the questions

The curriculum of both BE and BTech programmes is divided into eight semesters. The table below lists few specialisations offered under BE and BTech programmes along with seat inatke: 

Courses	Seats
B.E. in Aeronautical Engineering	60
B.Tech. in Artificial Intelligence and Data Science	180
B.Tech. in Artificial Intelligence and Machine Learning	180
B.E. in Automobile Engineering	30
B.E. in Biomedical Engineering	120

 

The total seats offered for B.E. / B.Tech at DSU - Dayananda Sagar University and Siddaganga Institute of Technology are 1140 and 1050, respectively. While DSU - Dayananda Sagar University offers this course in 9 specialisations, Siddaganga Institute of Technology offers the same in 12 specialisations. Hence, there are higher chances of getting a seat at DSU - Dayananda Sagar University due to higher seats.

Candidates are required to submit the original documents at the time of verification of documents for BE courses in the BMS College of Engineering. Moreover, candidates are required to submit original documents along with two sets of self-attested copies. The names of the documents are as follows: 

• Admission Order issued by KEA/ Seat Allotment Letter issued by Comed-K along with fee receipt
• Class 10 & Class 12 Mark sheet
• Caste Certificate in case of reserved category
• Transfer certificate
• Migration Certificate 
• Copy of Aadhar Card, etc.

Yes, candidates passing Class 12 with at least 80% aggregate are eligible for direct admission to BTech course. Additionally, Admission to BTech course is based on national or state-level Engineering entrance exam or AMCAT score. The university also accepts CUET UG or JEE Main score for admission to all BTech specialisations. The university also accepts NEET score for BTech Biotechnology. Besides, candidates must pass Class 12 with Physics, Chemistry and Mathematics as subjects is required to apply for BTech course. For Biotechnology, Food Technology and Bioinformatics, candidates need to pass Class 12 with PCM/ PCB. After the completion of the selection rounds, aspirants need to pay a course fee to confirm their seat in the university. The total tuition fee for BTech ranges between INR 5.20Lacsand INR 12.32Lacsas per an unofficial source. Click here to know more about Amity Jaipur BTech admission.

Bharati Vidyapeeths College of Engineering has received an impressive review rating of 4 on Placements based on 2 feedback of verified Shiksha students.

The median salary package offered to the students after finishing B.E. / B.Tech from NMIMS, Hyderabad is INR 1,022,000. While, the Median package offered by Chaitanya Bharathi Institute of Technology, Hyderabad after completion of B.E. / B.Tech is INR 500,000 - INR 630,000. Basis these stats, NMIMS, Hyderabad is better option compared to Chaitanya Bharathi Institute of Technology, Hyderabad on the Median salary parameter.

The application fee for BTech course at Dr MGR Educational and Research Institute is a mix of both online and offline procedures. The application fee for the course is INR 700. However, students who opted for the offline procedure need to pay the application fee through Demand Draft. Candidates need to send the completed application form to the undersigned:

The Director,

Admissions

Dr. MGR Educational and Research Institute
Periyar EVR Salai (NH 4 Highway)
Maduravoyal, Chennai - 600 095.

Note: Application forms Engineering with prospectus can be obtained in person for by Demand Draft /Online for INR 800/-DD in favour of "Dr. MGR Educational and Research Institute". Payable at Chennai with the full address of the applicant.

The detailed application steps are mentioned in the points below:

Step 1: Visit the official website of Dr MGR Educational and Research Institute drmgrdu.ac.in

Step 2: Under the 'Admission' tab, select 'Apply for Admission'.

Step 3: Click on 'Apply Now' for the course of choice and select the programme name.

Step 4: Fill out the application form and upload the documents.

Step 5: Pay the application fee and submit the form.

For UG programmes, the deadline to apply to Guru Ghasidas Vishwavidyalaya (GGU) is yet to be out for 2026. Guru Ghasidas Vishwavidyalaya follows an online application process for a majority of courses offered by the University. Students can apply from the official website. 

JNTUA cutoff 2024 has been released for the Last Round. As per the JNTUA cutoff 2024 released for the BTech courses, the required rank should ranged between . Considering the Last Round cutoff, the required rank needed would be varied from 6855 to 136972 for getting admission at JNTUA.

Further, check out the courses available under this range for the General AI candidates as per the JNTUA Last Round cutoff 2024:

Course	2024
B.Tech. in Civil Engineering	43852
B.Tech. in Electrical and Electronics Engineering	16442.1
B.Tech. in Mechanical Engineering	33700
B.Tech. in Electronics and Communication Engineering	6855
B.Tech. in Chemical Engineering	66065
B.Tech. in Computer Science and Engineering	136972

 

MSU Baroda offers B.Tech courses under a wide range of specializations. There are a total of 17 specializations under B.Tech, each having a different seat intake. The total annual intake for B.Tech at MSU Baroda is 570 seats, comprising of all seventeen courses. There are multiple branch availability like Civil Eng, Chemical Eng, Trasnport Eng, Computer Eng etc. Special courses like Textile Engineering or technology branches are also available.

In Veer Surendra Sai University of Technology, the B.Tech programmee include courses such as Computer Science and engineering, Electrical engineering, Electrical and Electronics engineering, Mechanical engineering, Civil Engineering, Information technology, Metallurgical and Materials engineering, Electronics and Telecommunication engineering, Chemical engineering, production engineering. For these all courses, the fees is 91,280 rupees (first year fees) only. The lateral entry students will also have same fees i.e 91,280 rupees only. 

According to the information available on the official website of the college, as per the previous academic calendar- the classes for Bachelor in Engineering courses offered at DSCE usually commence in early September. Therefore, it can be anticipated that the classes for this academic year will commence in the same month. However, the dates of the entrance exam have been released. So, firstly, candidates should prepare for the entrance exams according to their dates. 

The Harcourt Butler Technical University, Kanpur, cutoff 2025 has been released for different categories of students belonging to the AI and HS quotas. If you belong to the General AI quota, the HBTU CSE cutoff 2025 for Round 1 was 11799. For students belonging to the HS quota, the first-round closing rank stood at 26726. The cutoff ranks vary for different rounds, specialisations, and categories. Candidates can refer to the table below to view the category-wise CSE cutoff ranks for Round 1 for both AI and HS quotas:

Category	JEE Main Round 1 Cutoff 2025 (AI)	JEE Main Round 1 Cutoff 2025 (HS)
General	11799	26726
OBC	42488	39975
SC	-	136588
ST	-	209184
EW	-	35332
PWD	-	134244

 

JEECE 2024 counselling process has started. The candidates listed out in the state merit list will have to partcipate in the counselling process. For every round of JEECE counselling, fresh registrations will be accepted. During the JEECE counselling, the candidates will have to fill out their choice of courses and colleges in the order of preference. The allotment of seats will be announced online.

In order to be admitted to Bhopal's Lakshmi Narain College of Technology (LNCT), take the following actions:

1. Check Eligibility : Make sure you fulfill the requirements to be eligible for the programme of your choice.
2. Apply Online : Visit the LNCT website to complete and submit the application.
3. Entrance Exam/Direct Admission : The programme you're applying to may require you to take an entrance exam or submit a direct application.
4. Submit Documents : Attach the necessary personal and academic records.
5. Pay Fees : Follow the admission rules when completing the fee payment.