DTU Course Admissions 2025: Courses, Application, Eligibility, Selection & Fees

In 2022, DTU got ranked at position 35 for the Engineering category. Hence, it is considered a good option for MTech. Not just this, as per the verified students’ reviews on Shiksha, the institute offers all the necessary amenities to the students with respect to well-equipped laboratories with all the necessary instruments, computers and software according to students' needs, a spacious library with all kinds of books to enhance the IT and technology-related knowledge of students. However, the choice of branch depends on the requirement and discretion of the students. For more reviews on DTU for MTech,  click here.

MTech programme at DTU is available in both part-time and full-time modes. Admission to the M.Tech course is subject to a merit list prepared on the basis of GATE scores across all the specialisations. However, for part-time mode programmes, admission is subject to a merit list prepared on the basis of the last qualifying marks. Interested candidates can apply online on the official website. To be eligible for this course, students have to meet the below requirements:

• A pass in relevant UG degree with at least 60% aggregate
• Those in the final year of their UG degree can also apply
• Those with AMIE/ AMIS/ AMIICHE/ AMIIM/ Grad IETE or those who possess a BSc/ Diploma in Engineering are also eligible

Candidates seeking admission to MBA at DTU can are required to apply via CMAC or via DTU's official website After registering and filling out the online application, students are also required to pay the applicable application fee which ranges between INR 750 and INR 1,500 for different courses across different categories. A category-wise breakup of the application fee is as follows:

Course Name	Registration fee
MBA (via DSM/ USME)	INR 1,500 (for all categories)
MBA (Business Analytics)	INR 1,500 for General and OBC | INR 750 for SC/ ST/ PwD
MBA (Family Business and Entrepreneurship)	INR 1,500 for General and OBC | INR 750 for SC/ ST/ PwD
MBA (Entrepreneurship, Innovation and Venture Development)	INR 1,500 for General and OBC | INR 750 for SC/ ST/ PwD

Usually, the cutoff for DTU stays around 90, even for the reserved categories. Therefore, getting into B.Tech courses at DTU is difficult with a JEE Main percentile score of 90 or below. The cutoff also goes high and low every year, depending on the following factors: Number of aspirants registered, The difficulty level of the exam, Total number of seats available, total number of applications received for a particular program, and the category under which admission is sought. Therefore, it is very difficult to predict the exact cutoff and give an exact answer to this question.

DTU offers B.Tech programme to regular, working professionals, and lateral entry candidates. Selection to the regular mode of the programme will be done on the basis of JEE Main rank and JAC Delhi counselling. Candidates who have the JEE Main 2025 AIR can register for JAC counselling for admission to the B.Tech courses offered at DTU. Note that there will be no other mode of admission in DTU B.Tech admission. JAC Delhi is a single online counselling window for admission to B.Tech courses offered by DTU. Selection to courses such as B.Tech, M.Tech, and B. Des is made on the basis of national-level exam scores. For MBA, M.Des M.Sc. And Ph.D. DTU conducts its own entrance exams. DTU BBA admissions are made on the basis of Class 12 merits.

The opening and closing rank depends on the category and quota of candidates. For General category under all India quota, opening rank was 2109 and closing rank was 4008. Cut off are differant when it comes to other categories or female candidates and even domicile of home state. Admission to B.Tech. in Computer Science and Engineering in DTU - Delhi Technological University is based on the scores obtained in the entrance exam JEE. Applicants are advised to confirm what category are they applying while checking for cut offs.

CAT results are accepted by the DSM for MBA admission. However, individuals with a valid MAT score may also apply for the DSM/ USME MBA programme. Candidates seeking admission to an MBA offered via DSM or USME are required to apply online on the official website of the Common Management Admission Committee (CMAC Delhi). Additionally, they must meet the following eligibility requirements for admission:

• Must have completed a UG degree with a minimum aggregate ranging between 50% and 60% (10% relaxation for SC/ ST/ PwD candidates)
• Final-year students with proof of eligibility can also apply. 

For BTech admission, DTU accepts JEE Main followed by JAC counselling and the entire admission process is conducted via Joint Admission Counselling (JAC) Delhi. To be eligible, candidates must fulfil the below eligibility criteria:

• Delhi Region candidates (85% of seats): Aspirants passing the qualifying exam from a recognised school/ college/ institute located within the National Capital Territory (NCT) of Delhi will be considered for the Delhi Region only
• Outside Delhi Region candidates (15% of seats): Aspirants passing the qualifying examination from a recognised school/ college/ institute located outside the National Capital Territory of Delhi will be considered for Outside Delhi Region only.

Every year, the universities and colleges change their seat intake so that every student gets an equal opportunity to pursue education from the best universities. This does not make DTU any less competitive. In 2023 as well, India Today ranked the college 9 under the ‘Engineering’ category and 8 under the ‘Engineering (Government)’ category. Every year the popularity of this university is rising but the university is not compromising with the quality of education they are offering. 

 

Yes, Delhi Technological University offers a four-year BDes programme to students in the field of Design. DTU started offering the course in Fashion Design specialisation (Check Top Fashion Design Colleges in India here) and it mentioned about starting Film Design specialisation. Interested candidates can apply online on the official admission portal of DTU. Admisison to BDes is subject to a valid score in the UCEED exam. Interested candidates, however, are required to fulfil the minimum eligibility criteria set by the university for admission which is to be a pass out of Class 12 with Science/ Commerce/ Arts or a three-year Diploma recognised by AICTE.

As confirmed by a final-year Mechanical undergraduate at DTU-Professors, academics, labs and everything else may be comparable but you aren't going to study all the time. So, when it comes to activities outside the classroom, DTU trumps NSIT easily. Be it curricular fests, sports activities, cultural societies, lenient environment, better infrastructure or even campus as a whole, DTU is far better than NSIT. And taking into consideration the reputation and demand of Mechanical, DTU's Mechanical Engineering stream trumps NSIT's. Even in the field of placements, companies prefer DTU over NSIT for the recruitment of Mechanical Engineering. NSIT needs time to set up its brand when it comes to Mechanicals. '

Yes, Delhi Technological University also offers admission to candidates also who have AMIE/ AMIS. AMIICHE/ AMIIM/ Grad IETE or those who possess a BSc/ Diploma in Engineering degree. Such candidates are not required to have a GATE score for admission to DTU. For more details on this subject, students are advised to reach out to the admission office. Know more about DTU's M.Tech programme. 

The total number of seats available across BTech is 2,529. These seats are under a total of 14 specialisations (as per the official website of JAC Delhi) across all categories. In this intake, 85% of the total seats are reserved for Delhi students and the remaining 15% of seats are reserved for candidates from other states and cities. For more details on the seat information, students are advised to read the JAC Delhi Information Brochure of the year of admission carefully. 

In the recent 2022 MBA placements at DTU, Finance turned out to be the highest recruiting sector.  Additionally, the highest salary (domestic) offered stood at INR 19 LPA and the average salary stood at INR 8.9 LPA. More key highlights of Delhi School of Management (DSM) placements 2021-22 are presented below:

Particulars	DTU Placement Statistics 2022
No. of companies visited	150+
No. of new recruiters	50+
the highest package (domestic)	INR 19 LPA
the highest package (international)	INR 62.5 LPA
Average package	INR 8.9 LPA

The MBA placements data of DSM, DTU is released by the Delhi School of Management. Hence, for more details on MBA placements at DTU,  click here. 

The cutoff trend for B.Tech in Environmental Engineering at DTU - Delhi Technological University has been decreasing in the recent years. In 2021, the closing rank for B.Tech. in Environmental Engineering under general category for all India quota was 41389. In 2022, it decreased to 21598. Likewise, the cut off ranks have changed from 56347 to 38852 for OBC, 149540 to 101362 for SC, 265990 to 152852 for ST, 46539 to 25486 for EWS. This trend is likely to continue in the coming years, as the demand for engineering education in India continues to grow. Similar cut off trend can be seen for female candidates under all categories, however, the ranks are slightly different.