

M.Tech. in Control and Optimization at IIT Madras Overview
IIT Madras offers a 2 years M.Tech. in Control and Optimization at the PG level. This course provides candidates with essential knowledge and practical experience for career success. The institute holds the #1 position in the NIRF 2024 rankings under Engineering category. The total tuition fee for the course is INR 1,00,000. A total of 10 students can pursue the course at IIT Madras.
Total Tuition Fees | ₹1.00 Lakh Get Fees details |
Duration | 2 years |
Course Level | PG Degree |
Mode of Course | Full Time |
Official Website | Go to Website |
Seat breakup | 10 |
Type of University | Public/Government,Autonomous |
M.Tech. in Control and Optimization at IIT Madras Fees
IIT Madras M.Tech. in Control and Optimization fee structure is inclusive of various components, including tuition fees, hostel fees, security deposit, etc. Some components, such as the security deposit, are payable only once. Components like tuition fee are payable in instalments frequency decided by the college. The total tuition fee for the M.Tech. in Control and Optimization is INR 1,00,000. Other components included in the IIT Madras M.Tech. in Control and Optimization fee are presented in the table below:
| Fee components | Amount (2 years) |
|---|---|
₹ 1.00 Lakh | |
The fees might include components other than hostel fees.
Meal Plan is included in mentioned fee. | ₹ 1.57 Lakh |
One time payment includes Admission Fee, Caution Deposit (Refundable). | ₹ 8,000 |
₹ 2.65 Lakh |
M.Tech. in Control and Optimization at IIT Madras Frequently Asked Questions
To get admission at IIT Madras for MTech courses, candidate must qualify the GATE exam. The IIT Madras GATE Cutoff 2024 for the General AI candidates was ranged between 492 and 877. Therefore, it is quite likely that at the cutoff of 700-750, candidate can get admission to MTech courses. However, the choice of course would depend on the last-round closing rank of that particular course.
IIT Madras MTech placements are good. For top MTech branch such as CS, the median and average package recorded in 2025 was 24.6 LPA and 29 LPA. In MTech branch such as EE, CH and CE, the median package recorded was 22.1 LPA, 15 LPA and 18 LPA.
No, to get admission into IIT Madras MTech course, students have to appear for the GATE exam. This is a part of minimum eligibility criteria for M.Tech course admissions. After clearing the GATE exam, the students are selected on the basis of merit list. The students have to obtain a minimum of 60% in their UG course to be eligiblr for admisison.
For admission to IIT Madras, candidates must pass Class 12 and graduation before applying for the course. As per the minimum eligibility requirements for the course, candidates need a BE/BTech/BArch degree or a master's in Science/Arts with a minimum of 60% aggregate (55% for SC/ST/PwD). Qualifications from exams by recognised professional societies are also accepted. Further, candidates will be selected based on a valid GATE score.
Apart from this, candidates who graduated from IITs with BTech degree and having CGPA of 8.0 (on a scale of 10) and above are eligible to apply for direct admission without GATE score. In addition, it is also crucial that the applicant hold the relevant documents as a proof of eligibility that has to be submitted at the time of registration and documents verification after gettting admission.
The average package recorded during IIT Madras M.Tech placements 2025 for branch such as CS and EE was 29 LPA and 24.4 LPA.
- Compare
M.Tech. in Control and Optimization at IIT Madras Rankings
According to the NIRF 2024 rankings, IIT Madras has maintained a rank of #1 for its M.Tech. in Control and Optimization course in the academic year 2024. It should be noted that the ranking pertains to the entire M.E./M.Tech courses offered by IIT Madras, not just the M.Tech. in Control and Optimization. The ranking details for IIT Madras - Indian Institute of Technology in M.Tech. in Control and Optimization are displayed below:
M.Tech. in Control and Optimization at IIT Madras Students also asked
Placements at IIT Madras are good. According to the placement report 2025 released, median and average package recorded during BTech CSE placements was 46 LPA and 53.2 LPA. In BTech EE, the median and average salary offered was 22.5 LPA and 28.8 LPA. In ME, MM and PH branch, the average package stood at 16.9 LPA, 18.4 LPA and 34.1 LPA.
IIT Madras eligibility for each course-level is different. Students need to meet the basic admission requirements to get a seat at IIT Madras. The basic eligibility requirements for IIT Madras programmes are as below:
- For IIT Madras UG Engineering courses - Class 12 with a minimum aggregate of 75% and Physics, Chemistry, and Mathematics as mandatory subjects
- For IIT Madras PG courses - Bachelor's degree in a relevant field is required. The minimum marks may vary depending on the course.
IIT Madras overall highest package data is not released. The best placement was observed in BTech CS branch with average package of INR 53.2 LPA.
During MBA and Tech MBA placements 2025, the highest package offered was 35.5 LPA and 81 LPA.
IIT Madras admissions are entrance exam based. Candidates need to clear the National-level entrance exams for admissions to various courses. For MBA admissions, candidates should have a valid CAT score to appear for CAT Counselling. Based on IIT Madras cut off for MBA, candidates can get admission as per their corresponding rank. Candidates who want MBA admission can visit the official website of CAT to fill the application form online. At the time of CAT application candidates also need to submit the application fee on the portal.
DOMS IIT Madras cutoff for the Management courses including MBA is based on valid CAT scores. For IIT Madras MBA admission, students must meet both the overall CAT cut off percentile and the sectional cut off. For last three years the overall cutoff for DOMS IIT Madras has been constant at 85.11 percentile. Tabulated below is CAT percentile for DOMS IIT Madras cutoff for General category students for last three years:
| Master of Business Administration (MBA) - DoMS IIT Madras : CAT percentile Cutoff (General-All India) | |||
|---|---|---|---|
| Section | 2020 | 2021 | 2022 |
| Overall | 85.11 | 85.11 | 85.11 |
| Quants | 50 | 50 | 50 |
| VA-RC | 50 | 50 | 50 |
| DI-LR | 50 | 50 | 50 |
Download exam sample paper
M.Tech. in Control and Optimization at IIT Madras Placements
M.Tech. in Control and Optimization at IIT Madras Entry Requirements
M.Tech. in Control and Optimization at IIT Madras Admission Process
- Register and ApplyIIT Graduates and GATE qualified candidates can apply online with required information on COAP. NON-GATE Qualifiers and sponsored category students needs to apply separately to the institute.
- Suitability Test/ InterviewNON-GATE Qualifiers and sponsored category students needs to appear for suitability test/ interview. IIT Graduates and GATE qualified candidates are exempted.
- Final SelectionAdmission to IT Graduates and GATE qualified candidates is made by the institute on the basis of marks in GATE score/IIT score. Admission to NON-GATE Qualifiers and sponsored category students is made by the institute based on their performance in suitability test/ interview.
Important Dates
M.Tech. in Control and Optimization at IIT Madras Cutoffs
COAP round-wise cutoff Rank: (General-All India)
| Round | 2022 |
|---|---|
| 1 | 770 |
COAP round-wise cutoff Rank: (OBC-All India)
| Round | 2022 |
|---|---|
| 1 | 734 |
Explore Courses offered by IIT Madras
Other courses offered by IIT Madras
Get best suited colleges for you in real-time
Tell us about your city, course, budget & more
Discover best colleges that meet all your needs
Compare Courses From Similar Colleges
Similar courses in the same city
M.Tech. in Information Technology (Artificial Intelligence and Data Science)
Offered by Anna UniversityStudent Forum
Content authored by:
M.Tech. in Control and Optimization at IIT Madras News & Updates
M.Tech. in Control and Optimization at IIT Madras Contact Information
Indian Institute of Technology, Madras
Chennai ( Tamil Nadu)
(For general query)
(For admission query)
(For general query)
(For admission query)
Useful Links
Know more about IIT Madras
- All About IIT Madras
- Courses 2026
- Fees 2026
- Reviews on Placements, Faculty & Facilities
- Admission 2026 - Cutoffs, Eligibility & Dates
- Placement - Highest & Average Salary Package
- Cut off & Merit List 2026
- IIT Madras Rankings
- Gallery 2026
- Hostel & Campus Details & Reviews
- IIT Madras Faculty
- Compare IIT Madras
- IIT Madras Q&A
- Scholarships
- JEE Advanced
- IIT Madras News & Articles
Know more about Programs
- Engineering
- Control Systems
- M.E./M.Tech
- Food Technology
- Instrumentation Technology
- BTech Chemical Engineering
- AI & ML Courses
- Aeronautical Engineering
- BTech Petroleum Engineering
- Petroleum Engineering
- VLSI Design
- MTech in Computer Science Engineering
- Metallurgical Engineering
- BTech Robotics Engineering
- BTech in Biotechnology Engineering



