B.Tech Chemical Engineering Colleges in India

Vikrant University course admissions are based on entrance exam score or merit-based, as per the course requirement. Vikrant University course admission is subject to fulfilment of the admission criteria. The university provides a wide range of programmes across multiple specialisations. Admissions to the programmes offered at the university are primarily entrance-based. Students can check course-wise selection criteria below:

Course Name	Selection Criteria
BTech	Merit-based/JEE Main
BCA	Merit-based
BA	Merit-based
MBA	Merit-based
MTech	Merit-based/GATE
PhD	VURAT + PI

UIT RGPV Bhopal accepts JEE Main scores, followed by a counselling process for admission to the BTech courses. As per the UIT RGPV cutoff 2023, the last round closing rank for BTech ranged between 65225 and 309741, among which CSE was the most competitive specialisation. The Round 1 and the Last Round closing rank for BTech in CSE stood at 64215 and 65225, respectively for the General All India category candidates. 

Refer to the table given below to check out the last round closing ranks for all the BTech specialisations offered at UIT RGPV. 

Course	Last Round (Closing Rank)
B.Tech. in Computer Science and Engineering	65225
B.Tech. in Electronics and Communication Engineering	106880
B.Tech. in Automobile Engineering	283137
B.Tech. in Civil Engineering	220497
B.Tech. in Electrical and Electronics Engineering	114391
B.Tech. in Mechanical Engineering	155975
B.Tech. in Information Technology	95369
B.Tech. in Petro Chemical Engineering	309741

Yes, it is worth pursuing BTech at UPES Delhi as the university is recognised as the Scientific and Research Organisation by DISR, the Ministry of Science Technology,  and the Government of India. The university is a member of the AIU, International Association of Universities,  and World Design Organisation. UPES has also been accredited with an A Grade by NAAC and is ranked 42 under the Engineering category by NIRF 2024. 

During 2024 placements, Chemical Engineering emerged as the top branch with 74 students placed. The second in the sequence was the Surface Coating Technology branch. Take a look at the table below depicting the branch-wise number of students placed during Laxminarayan Institute of Technology placements 2024:

Branch	No. of Students Placed (2024)
Chemical Engineering	74
Surface Coating Technology	12
Polymer Technology	9
Petrochemical Technology	6
Oil Technology	6
Pulp Technology	4
Plastics and Polymers Technology	2
Food Technology	2

Yes, Indian national candidates must pass HSC or its equivalent examination with Physics and Mathematics as compulsory subjects along with one of the Chemistry or Biotechnology or Biology or Technical Vocational subject or Computer Science or Information Technology or Informatics Practices or Agriculture or Engineering Graphics or Business Studies with at least 45% aggregate (40% aggregate, in case of Backward class categories and Persons with Disability candidates belonging to Maharashtra State only) in the above subjects taken together to apply for BTech course. The preference shall be given to the candidate obtaining non-zero positive score in JEE Mains Paper-I over the candidates who obtained a non-zero score in MGMU-CET/ MHT CET/ PERA CET. Aspirants who have passed Diploma in Engineering and Technology with at least 45% aggregate 40% aggregate, in case of Backward Class categories and Persons with Disability candidates belonging to Maharashtra State only) can also apply for the BTech course. 

This will be done if your BTech admission is based on JEE Mains rank. You will need to register for counselling on the BTech admission portal, where all details about the process are mentioned. 

JEE Main Registration 2024 session 2 last date was March 4. NTA released JEE Main 2024 Application form session 2 on February 2. JEE Main Application form 2024 session 2 was available online on the official website jeemain.nta.ac.in. Candidates who have applied for JEE Main 2024 session 1 had not register again. Such candidates only need to fill the paper details (BE/BTech or BArch/BPlan) and pay application fees. JEE Main 2024 registration last date session 2 was March 4.

Anil Neerukonda Institute of Technology and Sciences placements 2025 will be updated here once out. The college is visited by top companies for placements such as Walmart Global Tech, Amazon Aws, and others. The below-mentioned are Anil Neerukonda Institute of Technology and Sciences placement statistics 2020-2024:

Particulars	Statistics 2020-2024
the highest package	INR 27 LPA
the lowest package	INR 2 LPA

MVGRCE provides great placements to its students. Check out the table below to know about the MVGRCE placement statistics 2025:

NOTE: MVGRCE Placements for 2025 are still ongoing

The fees range for courses offerred by the VSB Engineering College is around INR 35000 - INR 200000.

Determining the exact number of students enrolled in B.Tech. programs at Guru Kashi University (GKU) can be challenging due to the lack of readily available and consistently updated official data. However, I can offer some insights based on various sources: Firstly, according to the university's website, GKU offers B.Tech programs in multiple disciplines such as computer science, mechanical engineering, and electrical engineering. Additionally, discussions with current students and alumni suggest that the B.Tech programs at GKU are highly sought after and attract a significant number of applicants each year.

Estimates:

• Total student strength: GKU claims to have a total student strength of 7,000+ students across various courses. While this doesn't directly translate to B.Tech students,  it suggests a sizeable student body,  indicating a potentially significant number of B.Tech students as well.

• Number of B.Tech courses: GKU offers B.Tech programs in 8 specializations: Computer Science and Engineering,  Electrical Engineering,  Mechanical Engineering,  Petro Chemical and Petro Refinery Engineering,  Civil Engineering,  Electronics and Communication Engineering,  Artificial Intelligence and Machine Learning,  and Computer Science with Data Science.

• Intake per specialization: Based on student reviews and information on websites like Shiksha,  the intake for each B.Tech specialisation at GKU might range from 60-70 seats per year.

Calculating a rough estimate:

• Assuming an average intake of 65 students per specialisation and 8 specializations,  the potential number of B.Tech students at GKU could be around 520 (65 students per specialisation * 8 specializations).

• This is just an estimate,  and the actual number might be higher or lower depending on several factors like actual intakes,  student dropouts,  and new admissions after the first year.

Recommendations:

• Contact the GKU Admissions Office: For the most accurate and current information on the number of B.Tech students and specific intakes for each specialization,  the best approach is to directly contact the GKU Admissions Office.

• Consider specific specializations: If you're interested in a particular B.Tech. specialization,  inquire about the exact intake for that program. This will give you a better understanding of the competition and availability of spots in your desired specialization. Additionally, it is important to note that the number of intakes for each specialisation may vary from year to year based on the demand and resources available.

Remember, the provided information is an approximation based on available data and might not be completely accurate. For the most reliable figures, contacting GKU directly is strongly recommended. By reaching out to the GKU Admissions Office, you can obtain the most up-to-date and accurate information regarding the number of B.Tech. students and specific intakes for each specialization. It is important to note that the provided information is an estimate based on available data, so contacting GKU directly will ensure you have the most reliable figures.

Yes, Uka Tarsadia really supports students with placement training. They arrange placement drives and internship chances also. If student use these well then they get more confidence to crack real interviews easy.

KLE Dr. M.S.Sheshgiri College of Engineering and Technology provides programmes including B.E. / B.Tech, M.E./M.Tech, MBA/PGDM, MCA in streams such as Engineering, Business & Management Studies, IT & Software, and are excellent for students to build their careers. The institute has specializations in Electronics & Communication Engineering, Electrical Engineering, Computer Science Engineering, Mechanical Engineering, Chemical Engineering, Civil Engineering, Biomedical Engineering, VLSI Design, Structural Engineering, Environmental Engineering.

At present, there is no announcement of an application deadline for the BTech programme. However, applications for the BTech programmes are accepted for the academic year 2025. Eligible applicants can apply on the official website and submit supporting documents for eligibility. Candidates are also advised to check the official website to stay informed about upcoming events and avoid missing deadlines.

Sarvajanik College of Engineering and Technology has announced its 2025 placement report. Have a look at the data tabulated below to know more:

The total fee for Calcutta Institute of Technology BTech course ranges between INR 3.26 Lacs and INR 3.98 lakh. The total fee is a cumulative of various components such as admission fee, tuition fee, library fee, development fee, etc. The fee differs for lateral entry courses. The total fee for BTech (LE) ranges between INR 2.49 lakh and INR 3.03 lakh.

DBATU offers four years B.Tech programs in following specializations with their seats:

B.Tech. Chemical Engineering (60 seats)
B.Tech. Computer Science and Engineering (60 seats)
B.Tech. Electrical Engineering (60 seats)
B.Tech. Electronics & Telecommunication Engineering (60 seats)
B.Tech.  Information Technology (60 seats)
B.Tech. Mechanical Engineering (60 seats)
B.Tech. Petro Chemical Engineering (60 seats)
B.Tech. Civil Engineering (60 seats)

As per Shiksha verified reviews, Shivajirao S. Jondhale College of Engineering (SSJCOE) has an impressive review rating of 2.37 by 60 students.

The BTech Mechanical Engineering syllabus is not the same across all colleges, as every college committee sets a particular coursework pattern at the start of every academic year to be followed for the respective batch. The syllabus includes some core subjects, interesting electives, and lab work that gives detailed knowledge to the students about the workings of the field. 

Babu Banarasi Das National Institute of Technology and Management is a well-known institution for B.E. / B.Tech, BBA, BCA, M.E./M.Tech, MCA, B.Pharma, MBA/PGDM courses. These programs are delivered by highly experienced faculty. As per Shiksha's verified reviews, Babu Banarasi Das National Institute of Technology and Management has a rating of 3.56 on the basis of Shiksha-verified reviews by students. Not just this, it has also been rated 4.23 on Campus Life, 2.91 on Placements, 3.4 on Faculty and 3.98 on Infrastructure.

G H Patel College of Engineering and Technology cutoff 2024 has been released across various specialisations in opening and closing ranks. G H Patel College of Engineering and Technology BTech cutoff 2024 ranged between 2690 and 38137 for the General HS category candidates, wherein BTech in CE is the most competitive course. The easiest BTech specialisation to secure admission in is B.Tech. in Civil Engineering. For a detailed G H Patel College of Engineering and Technology branch-wise cutoff 2024, candidates can refer to the table below for the Round 1 cutoff. The cutoff mentioned below is for the General category under the HS Quota.

Course	2024
B.Tech in Electronics and Communication Engineering	8821
B.Tech in Information Technology	3866
B.Tech in Computer Engineering	2690
B.Tech. in Computer Science and Design	5943
B.Tech. in Computer Science and Engineering (Internet of Things)	4909

The placement cell of the Department of Technology Shivaji University conducted 10 training activities in each programme. Some of the programmes are listed below:

1. Future Skills Training Programme and Aptitude Training (Fuel)
2. Campus Recruitment Aptitude Training under LEAD
3. Job Opportunities for Engineering Students
4. Career Preparation and Planning
5. Lecture on “Technical Preparation”

Bipin Tripathi Kumaon Institute of Technology is a renowned institution offering M.E./M.Tech, B.E. / B.Tech, MCA. Students can choose these courses to embark on their careers in the field of Engineering, IT & Software. The institute is staffed with highly skilled and experienced faculty members dedicated to delivering these programs. Bipin Tripathi Kumaon Institute of Technology boasts an impressive review rating of 3.28 based on student feedback at Shiksha. Additionally, it has received a rating of 3.56 for Campus Life, 2.74 for Placements, 3.39 for Faculty, and 3.3 for Infrastructure.