Best Engineering Colleges in Delhi NCR: Fees, Admission 2026, Ranking, Courses, Placements

For merit-based programs such as BBA and BArch, 85% in Class 12 can get admission at IGDTUW. But BTech, MTech, MCA, and MBA need entrance exams, and Class 12 marks will not be enough. Admission is through competitive exams such as JEE Main, GATE, and CAT. It is advisable to verify course-wise eligibility before applying.

Jamia Hamdard has not released the accepted JEE Main cutoff for BTech admission. However, aspirants need to fulfil the eligibiltiy and selection requirements for admission to BTech course. Jamia Hamdard accepts JEE Main for BTech admission. Candidates need to pass Class 12 examination with Mathematics and Physics as compulsory subjects and one of the following: Computer Science, Chemistry, Electronics from CBSE or any other Board with at least 50% aggregate or equivalent CGPA in aggregate to apply for BTech course.

Check JEE Main College Predictor

To get admission in BML Munjal University, a student with 60+ percentage in 12th board is eligible. Student have to appear for BMU SAT after scoring good in this test you will get scholarship. Scholarship also provided on the basis of JEE score.

Manav Rachna University offers various merit-based scholarships. Find below the details for schemes ‘Utkarsh’ and ‘Uttam’ for the candidates on the basis of MRNAT score for UG & PG courses:

MRNAT Score	‘Utkarsh’	‘Uttam’
90.00% & above	100% tuition fee waiver	100% tuition fee waiver
80.00% & above but below 90.00%	50% tuition fee waiver	25% tuition fee waiver
70.00% & above but below 80.00%	25% tuition fee waiver	10% tuition fee waiver

 

University Institute of Engineering and Technology, Maharshi Dayanand University has courses such as B.Tech, M.E./M.Tech, BCA to offer. These courses are in the stream of Engineering, IT & Software. University Institute of Engineering and Technology, Maharshi Dayanand University has specializations such as B.Tech specializations in Civil Engineering, Biotechnology Engineering, Computer Science Engineering, Electrical Engineering, Electronics & Communication Engineering, Mechanical Engineering, Artificial Intelligence & Machine Learning, M.E./M.Tech specializations in Power Engineering, Structural Engineering, Electronics & Communication Engineering, Mechanical Engineering, Artificial Intelligence & Machine Learning, Computer Science Engineering, Biotechnology Engineering.

Candidates who are Class 12 pass with at least 60% aggregate in PCM can apply for ASET Noida BTech admission under non sponsored category. The minimum aggregate for sponsored category is 55%. Candidates aggregate is calculated as per marks scored in English and three academic subjects. 

The median salary package offered to the students after finishing B.E. / B.Tech from Shiv Nadar University (SNU) is INR 997,000. While, the Median package offered by Maharaja Agrasen Institute of Technology after completion of B.E. / B.Tech is INR 825,000. Basis these stats, Shiv Nadar University (SNU) is better option compared to Maharaja Agrasen Institute of Technology on the Median salary parameter.

The median salary package offered to the students after finishing B.E. / B.Tech from Shiv Nadar University (SNU) is INR 997,000. While, the Median package offered by Maharaja Surajmal Institute of Technology after completion of B.E. / B.Tech is INR 650,000. Basis these stats, Shiv Nadar University (SNU) is better option compared to Maharaja Surajmal Institute of Technology on the Median salary parameter.

BVP Delhi JEE Main cutoff was released for several category students, including General, ST, SC and OBC, among others. During the Bhartiya Vidya Peeth Delhi cutoff 2023, the last round closing ranks for BTech ranged between 455500 and 655311 for the ST All India category candidates. For SC category students, the last round closing ranks ranged between 187240 and 318810 for the AI quota. 

Candidates can refer to the table given below to check out the category-wise last round closing rank for BTech in CSE course:

Category	Last Round Closing Rank (AI Quota)
General	53659
ST	455500
SC	187240

As per the data collated from verified students' reviews on Shiksha, companies, such as Capgemini, Infosys, Amazon, Accenture, TCS, Wipro, Walmart, and Tech Mahindra hire the students of this college. Additionally, 70-90% of students get placement opportunities every year with an average salary ranging between INR 2.5 and INR 5.35 lakh. Hence, it is a good college for BTech, considering the placement statistics. In 2024, the highest package offered at the college stood at INR 55 LPA. AKGEC Ghaziabad is ranked by India Today and Times. In 2024, Times ranked the college #149 for its BTech course.

The Sharda School of Engineering and Technology (SSET) offers different admissions for B.Tech programmes based on the student's category and branch.

There are 1125 places available for the B.Tech programme at SSET, with 900 seats available for the general category and 225 seats available for the NRI/sponsored category. The intake proportion may vary year by year depending upon the categories and branches.

Branch	General	NRI
CSE	240	60
ME	120	30
EEE	60	15
ECE	120	30

The FET MRIIRS BTech eligibility criteria vary depending on the course. Mentioned below is the course-wise eligibility criteria fetched from the official website of the institute:

• Civil Engineering/Computer Science: Pass in the Class 12 examination with at least 50% marks in aggregate in 5 subjects and eligibility shall be determined based on aggregate marks in
  - Chemistry, Physics, Mathematics & English and
  - One subject with the highest score out of the remaining subjects
• Civil Engineering (LE)/Biotechnology (LE): 45% marks in a three-year Diploma in Engineering in any branch/discipline from the State Board of Technical Education or Equivalent Examination or BSc from a recognised University as defined by UGC, with at least 50% marks and passed Class 12 with Mathematics as a subject
• Biotechnology: Pass in the Class 12 examination with at least 50% marks in aggregate in 5 subjects and eligibility shall be determined based on the percentage of aggregate marks in
  - English, Physics, Chemistry
  - One subject out of Biology, Computer Science, Biotechnology or Mathematics
  and
  - One subject with the highest score out of the remaining subjects

SRM University, Sonepat is recognised by the UGC and ALU and is approved by the BCI, DSIR, and NCHMCT. The university is also a member ACU. SRM University, Sonepat offers a wide range of UG, PG and doctoral-level programmes. The University offers four years BTech programme across ten spcialisations with a choice-based credit system. The curriculum is designed to prepare students for careers in engineering and technology. Talking about the placements, the Unversity offers a decent palcements for its BTech programme. Click here for detailed placement inofrmation.

The fees range for courses offerred by the IMS Engineering College is around INR 122400 - INR 272400.

No, Shobhit University does not accept direct admissions for any of its courses. Candidates must fulfil the admission criteria of the desired course to be eligible for admission. Students are mainly selected based on entrance exam scores, however, merit-based admissions are also offered for certain courses, such as BSc. There is no management quota provision at Shobhit Institute of Engineering and Technology (Shobhit University).

World College of Technology and Management offers good placement for its BTech course annually. As per the latest report, the overall the highest package offered during World College of Technology and Management placement 2023 stood at INR 42 LPA. The key highlights of World College of Technology and Management placements for the Class of 2023 are tabulated below:

Particulars	Placement Statistics (2023)
the highest package	INR 42 LPA
Average package	INR 6 LPA to INR 8 LPA
Total recruiters	2,000
Total students placed	1,990
Placement rate	100%

Yes, all candidates who are interested in securing admissions into the BTech courses at GITAM must appear for the JEE Mains entrance examination. The JEE Mains exam is conducted in two sessions in one year. Candidates who wish to register for the JEE Mains entrance exam can do so by visiting the official portal for the exam and following the instructions of the announcement circular.

Yes, GNIOT Greater Noida, Group of Institutions offers direct admission. Students can check the detail admission criteria from the table presented below:

Through UPSEEcounselling /qualified candidate of UPSEE under vacant seats after counseling	Direct Admission
40% marks for SC/ST Category candidates	45% marks for SC/ST Category candidates
45% marks for other categories candidates	50% marks for other categories candidates

 

The BTech Mechanical Engineering syllabus is not the same across all colleges, as every college committee sets a particular coursework pattern at the start of every academic year to be followed for the respective batch. The syllabus includes some core subjects, interesting electives, and lab work that gives detailed knowledge to the students about the workings of the field. 

The number of students who will be able to do BTech at Lingaya's Vidyapeeth will depend on the seat intake. The seat intake for BTech for 2024 admissions is 814. The total seat intake is further divided into several departments of BTech. 

Seats and Distribution:-

• Bachelor of Technology (B.Tech.) (Lateral Entry):- 78
• B.Tech. in Computer Science and Engineering in Collaboration with Apple :-30
• B.Tech. in Electrical and Electronics Engineering:- 30
• B.Tech. in Electronics and Communication Engineering (IOT) :-18
• B.Tech. in Computer & Electronics Engineering :-60
• B.Tech. in Electronics and Communication (Cyber Security) :-18
• B.Tech. in Civil Engineering (GIS and Remote Sensing) :-60
• B.Tech. in Computer Science and Engineering (Data Science):- 40
• B.Tech. in Civil Engineering 120
• B.Tech. in Mechanical Engineering :-90
• B.Tech. in Mechanical and Automobile Engineering:- 60
• B.Tech. in Electronics and Communication Engineering :-90
• B.Tech. in Computer Science and Engineering (Artificial Intelligence and Machine Learning) :-60
• B.Tech. in Computer Science and Engineering:- 60

Students can choose any specialisation according to their intrests. The final cut off will be released according to the seat intake and applications. Different departments of BTech will have different cut offs.