DTU Cutoff 2022: Check Category-Wise JEE Main Cutoff Ranks
DTU BTech cutoff 2022 were made available by Joint Seat Allocation Authority. For admission in 2022 session, the JEE Main cutoffs were announced for shortlisting candidates for admission to BTech branches. As per the process, the cutoff were published for the First and Last Round based on All India and Home State categories. According to DTU cutoff 2022, the most demanded course was Computer Science Engineering with the Last Round of 4008 for the General All India Category. To know more, read the article below:
| DTU Cutoff 2024 | DTU Cutoff 2023 | DTU Cutoff 2021 |
- DTU Cutoff 2022 for General All India Category
- DTU Cutoff 2022 for OBC All India Category
- DTU Cutoff 2022 for SC All India Category
- DTU Cutoff 2022 for ST All India Category
- DTU Cutoff 2022 for EWS All India Category
- DTU Cutoff 2022 for PWD All India Category
- DTU Cutoff 2022 for General Home State Category
- DTU Cutoff 2022 for General Home State Female Category
- DTU Cutoff 2022 for OBC Home State Category
- DTU Cutoff 2022 for SC Home State Category
- DTU Cutoff 2022 for ST Home State Category
- DTU Cutoff 2022 for EWS Home State Category
- DTU Cutoff 2022 for PWD Home State Category
- Also Read:
DTU Cutoff 2022 for General All India Category
In the General All India category, Computer Science and Engineering was the most competitive course, with a Round 1 cutoff of 2109 and a Final Round cutoff of 4008. Apart from that, Electronics and Communication Engineering was the second-most competitive course which has a Last Round cutoff of 7608. Check out more specialisations in the table below.
| Course Name |
Round 1 |
Last Round |
|---|---|---|
| Biotechnology |
12855 |
21195 |
| Chemical Engineering |
10365 |
17878 |
| Civil Engineering |
12020 |
19777 |
| Computer Science and Engineering |
2109 |
4008 |
| Electrical Engineering |
6628 |
10716 |
| Electronics and Communication Engineering |
5016 |
7608 |
| Engineering Physics |
10501 |
13103 |
| Environmental Engineering |
13574 |
21598 |
| Information Technology |
2710 |
5110 |
| Mathematics and Computing Engineering |
3849 |
6190 |
| Mechanical Engineering |
8869 |
14579 |
| Mechanical Engineering (Automotive Engineering) |
8907 |
14674 |
| Production and Industrial Engineering |
12234 |
19738 |
| Software Engineering |
3293 |
5871 |
Commonly asked questions
The opening and closing rank depends on the category and quota of candidates. For general category under All India, opening rank was 6628 and closing rank was 10716. Cut off are different when it comes to other categories or female candidates and even domicile of home state. Admission to B.Tech in Electrical Engineering in DTU - Delhi Technological University is based on the scores obtained in the entrance exam JEE. Applicants are advised to confirm what category are they applying while checking for cut offs.
With a JEE Main rank between 30000 and 40000, it is not possible to get admission to any of the BTech branches for the General AI category. For BTech admission, the DTU JEE Main cutoff 2026 for Round 1 ranged between 12 and 15709 for students belonging to the General AI quota. So, candidates seeking admission must target a cutoff rank of up to 15000 and below to secure a seat at this institute.
No, DTU does not conduct any entrance exam of its own for admission to any of the UG, PG or doctoral-level courses. Admission for the flagship BTech programme is based on JEE Main scores and the entire process of counselling are conducted by JAC Delhi. Further, DTU admission to all the remaining courses is mostly based on national/ university-level entrance exams, such as UCEED, GATE, CAT, MAT and CMAT, among others. However, there are a few MBA specialised courses and BBA, admission to which is offered based on the past qualifying exam (UG level) followed by an interview round.
DTU Cutoff 2022 for OBC All India Category
According to the DTU BTech cutoff 2018, the Last Round for Computer Science and Engineering concluded at 11079 and it was the most competitive course. On the other hand, Environment Engineering was the least competitive course in the OBC AI category. Additionally, in 2018, the CSE Last Round cutoff was 11079. The DTU cutoff distribution by branch is tabulated below:
| Course Name |
Round 1 |
Last Round |
|---|---|---|
| Biotechnology |
23435 |
38659 |
| Chemical Engineering |
20418 |
37202 |
| Civil Engineering |
22128 |
36090 |
| Computer Science and Engineering |
6505 |
11079 |
| Electrical Engineering |
16214 |
23330 |
| Electronics and Communication Engineering |
12278 |
19147 |
| Engineering Physics |
19423 |
33721 |
| Environmental Engineering |
23555 |
38852 |
| Information Technology |
8624 |
13239 |
| Mathematics and Computing Engineering |
10517 |
16022 |
| Mechanical Engineering |
19101 |
32601 |
| Mechanical Engineering (Automotive Engineering) |
19017 |
33448 |
| Production and Industrial Engineering |
22513 |
38178 |
| Software Engineering |
9054 |
14360 |
DTU Cutoff 2022 for SC All India Category
The cutoffs for Round 1 and the Final Round of CSE in the SC AI category were 23519 and 33529. Additionally, CSE was the most competitive course in 2022. Moreover, DTU ranked Information Technology as their second-most competitive topic. For further specialisations, please see the table below:
| Course Name |
Round 1 |
Last Round |
|---|---|---|
| Biotechnology |
73905 |
96626 |
| Chemical Engineering |
63485 |
87343 |
| Civil Engineering |
63676 |
70593 |
| Computer Science and Engineering |
23519 |
33529 |
| Electrical Engineering |
49145 |
64355 |
| Electronics and Communication Engineering |
37373 |
50671 |
| Engineering Physics |
64929 |
88814 |
| Environmental Engineering |
75626 |
101362 |
| Information Technology |
26507 |
37373 |
| Mathematics and Computing Engineering |
30712 |
47217 |
| Mechanical Engineering |
50671 |
78834 |
| Mechanical Engineering (Automotive Engineering) |
59569 |
87198 |
| Production and Industrial Engineering |
70177 |
95908 |
| Software Engineering |
28409 |
43878 |
Commonly asked questions
For admission to most of the undergraduate and postgraduate courses offered at Delhi Technological University, students need to score 50% to 60% minimum total in their last qualifying degree or course to be eligible. A course-wise list of eligibility criteria for DTU admission is mentioned in the table:
| Course Name | Eligibility Criteria |
|---|---|
| BTech | Class 12 with 60% |
| BDes | A pass in Class 12 |
| BBA | Class 12 with 50% |
| MSc
| Class 12 with 50% in Economics |
| MTech | Relevant UG degree with at least 60% |
| MDes | 4-year UG with 55% |
| E-MBA | Any UG degree with 60% |
| E-MBA | UG degree with 50% |
Relevant BSc/ UG degree with 55% | |
| E-MBA | UG degree with 50% |
| PhD | Relevant PG degree with 55% |
Yes, Delhi Technological University accepts only Class 12 scores for admission to the BBA and BA (Economics) courses offered by it at the undergraduate levels. While admission to all the other UG and PG courses is subject to national-level entrance exams and couselling process, there courses offer direct merit-based admission to the students. Check DTU eligibility criteria for all UG courses in the below table:
| Course Name | Eligibility & Selection Criteria |
|---|---|
| BTech | Eligibility: Class 12 with 60% |
| BDes | Eligibility: A pass in Class 12 Selection Criteria: UCEED |
| BBA | Eligibility: Class 12 with 50% Selection Criteria: Merit list is drawn based on scores obtained in the best of 4 subjects in Class 12 |
| BA (Hons) in Economics | Eligibility: Class 12 with 50% Selection Criteria: Merit list is drawn based on scores obtained in the best of 4 subjects in Class 12 |
The eligibility and selection criteria varies course to course depending upon the course level and the field of the programme. Check out the table below to learn more about the same:
| Course Name | Eligibility | Selection Criteria |
|---|---|---|
| BTech | Class 12 with 60% aggregate | JEE Main Counselling: JAC Delhi |
| BDes | Class 12 in any stream | UCEED |
| BA | Class 12 in any stream | Merit-based |
| MBA | Graduate with at least 60% aggregate | CAT or MAT via CMAC counselling/CAT/MAT + PI |
All MBA aspirants seeking admission to Delhi Technological University are required to meet the following eligibility criteria for admission:
- Completed an undergraduate degree with an aggregate ranging between 50% and 60% (for General category students) depending on the course. 10% relaxation in the minimum required aggregate is offered to the students of SC/ ST and PwD category.
- Those in the final year can also apply with a proof of eligibility and graduation scores at the time of the personal interview
DTU Cutoff 2022 for ST All India Category
According to DTU CSE cutoff 2018, CSE had the same First and Last Round cutoff of 53753. In spite of that, the most competitive course was Computer Science and Engineering. Apart from it, Biotechnology was the least competitive course, with a last round cutoff of 171820. It was followed by Production and Industrial Engineering. For other specialisations, see the table below:
| Course Name |
Round 1 |
Last Round |
|---|---|---|
| Biotechnology |
136362 |
171820 |
| Chemical Engineering |
127600 |
145081 |
| Civil Engineering |
94252 |
128943 |
| Computer Science and Engineering |
53753 |
53753 |
| Electrical Engineering |
97178 |
120345 |
| Electronics and Communication Engineering |
70543 |
96707 |
| Engineering Physics |
113611 |
142444 |
| Environmental Engineering |
145081 |
152852 |
| Information Technology |
60395 |
66752 |
| Mathematics and Computing Engineering |
80925 |
83839 |
| Mechanical Engineering |
107968 |
136362 |
| Mechanical Engineering (Automotive Engineering) |
123475 |
130188 |
| Production and Industrial Engineering |
142444 |
150924 |
| Software Engineering |
66752 |
74324 |
DTU Cutoff 2022 for EWS All India Category
According to the DTU EWS AI category cutoff 2022, the the EWS AI category was less competitive than General, OBC, SC and ST categories. Further, CSE had the First and Last Round cutoff of 4255 and 6987, respectively. Additionally, the most competitive course was CSE. Moreover, the second most competitive course was Information Technology. Below are the tabulated branch-wise cutoffs:
| Course Name |
Round 1 |
Last Round |
|---|---|---|
| Biotechnology |
15294 |
26922 |
| Chemical Engineering |
14484 |
19424 |
| Civil Engineering |
14356 |
21134 |
| Computer Science and Engineering |
4255 |
6987 |
| Electrical Engineering |
11405 |
14493 |
| Electronics and Communication Engineering |
8327 |
11405 |
| Engineering Physics |
13983 |
17858 |
| Environmental Engineering |
14651 |
25486 |
| Information Technology |
4565 |
7237 |
| Mathematics and Computing Engineering |
6863 |
10830 |
| Mechanical Engineering |
13156 |
17530 |
| Mechanical Engineering (Automotive Engineering) |
14215 |
18736 |
| Production and Industrial Engineering |
14541 |
24406 |
| Software Engineering |
6088 |
8792 |
Commonly asked questions
For General HS quota, the JAC Delhi 2026 cutoffs for Round 1 were in the range of 9170 and 56089. The cutoff range varies for different categories and rounds. Check out the table below to view the category-wise first-round closing rank under the HS quota.
| Category | JAC Delhi Cutoff 2026 |
|---|---|
| General | 9170 - 56089 |
| OBC | 41031 - 198937 |
| SC | 100225 - 341827 |
| ST | 261198 - 1436790 |
| EWS | 24019 - 95505 |
| PWD | 103810 - 899143 |
DTU JAC Delhi cutoff 2026 is based on candidates' performance in the JEE Main entrance exam. The cutoff was released across various categories under the AI and HS quotas. Check out the table below to view the DTU category-wise CSE cutoff 2026 for Round 1.
| Category | AI Quota | HS Quota |
|---|---|---|
| General | 3430 | 9170 |
| OBC | 9777 | 41031 |
| SC | 35953 | 100225 |
| ST | 80073 | 261198 |
| EWS | 6736 | 24019 |
| PWD | 49886 | 103810 |
The opening and closing rank depends on the category and quota of candidates. For General category under all India quota, opening rank was 2109 and closing rank was 4008. Cut off are differant when it comes to other categories or female candidates and even domicile of home state. Admission to B.Tech. in Computer Science and Engineering in DTU - Delhi Technological University is based on the scores obtained in the entrance exam JEE. Applicants are advised to confirm what category are they applying while checking for cut offs.
For BTech admission, DTU accepts JEE Main followed by JAC counselling and the entire admission process is conducted via Joint Admission Counselling (JAC) Delhi. To be eligible, candidates must fulfil the below eligibility criteria:
- Delhi Region candidates (85% of seats): Aspirants passing the qualifying exam from a recognised school/ college/ institute located within the National Capital Territory (NCT) of Delhi will be considered for the Delhi Region only
- Outside Delhi Region candidates (15% of seats): Aspirants passing the qualifying examination from a recognised school/ college/ institute located outside the National Capital Territory of Delhi will be considered for Outside Delhi Region only.
DTU Cutoff 2022 for PWD All India Category
Candidates can refer to the table below to check out Round 1 and the Last Round closing ranks for Civil and Mechancal Engineering offered at DTU. Based on the cutoff below, the Last Round for Mechanical Engineering concluded at 418759. Check the following table for cutoffs for additional specialisations:
| Course Name |
Round 1 |
Last Round |
|---|---|---|
| Civil Engineering |
268859 |
- |
| Mechanical Engineering (Automotive Engineering) |
- |
418759 |
DTU Cutoff 2022 for General Home State Category
The General Home State category's Last Round closing ranks varied from 10860 to 106317. The most competitive specialisation was BTech CSE, with final rankings of 7859 in the first round and 10860 in the final round. In addition, there was the least competition in the Final Round for the Biotechnology BTech course. For information on the cutoff for more specialisations, refer to the table below:
| Course Name |
Round 1 |
Last Round |
|---|---|---|
| Biotechnology |
54468 |
106317 |
| Chemical Engineering |
44665 |
80829 |
| Civil Engineering |
49470 |
94046 |
| Computer Science and Engineering |
7859 |
10860 |
| Electrical Engineering |
26990 |
41603 |
| Electronics and Communication Engineering |
19480 |
27509 |
| Engineering Physics |
40729 |
62030 |
| Environmental Engineering |
53019 |
105012 |
| Information Technology |
10414 |
13936 |
| Mathematics and Computing Engineering |
14603 |
22098 |
| Mechanical Engineering |
37330 |
61980 |
| Mechanical Engineering (Automotive Engineering) |
39641 |
68175 |
| Production and Industrial Engineering |
48275 |
94858 |
| Software Engineering |
12363 |
17842 |
Commonly asked questions
UCEED dates are out for admission. DTU students can check the complete schedule. The university will release the scorecard between March and July.
Candidates seeking BTech DTU admission can refer to the table below to check out the last five years' DTU JEE Main cutoff for BTech and Integrated BTech courses for various categories.
| DTU Cutoff for the Last 4 Years | |
|---|---|
| DTU Cutoff 2024 | Download Now |
| DTU Cutoff 2023 | Download Now |
| DTU Cutoff 2022 | Download Now |
| DTU Cutoff 2021 | Download Now |
| DTU Cutoff 2020 | Download Now |
The last year 2022 cutoff ranks for B.Tech. in Information Technology at DTU - Delhi Technological University for candidates other than General category are - 13239 for OBC, 37373 for SC, 66752 for ST, 7279 for EWS. While the admissions are based on the scores/rank obtained in JEE exam, the last cut offs also change a lot depending on All India quota or Home State. It also varies if the applicant is a female.
DTU Cutoff 2022 for General Home State Female Category
For the General Home State female category, the ranks for Computer Science and Engineering were 8594 and 15705, respectively. In relation to that, CSE was the most competitive course while Production and Industrial Engineering was the least competitive course. Check out the cuotoffs from the table given below:
| Course Name |
Round 1 |
Last Round |
|---|---|---|
| Biotechnology |
98337 |
130019 |
| Chemical Engineering |
94356 |
110162 |
| Civil Engineering |
99310 |
129113 |
| Computer Science and Engineering |
8594 |
15705 |
| Electrical Engineering |
41969 |
58015 |
| Electronics and Communication Engineering |
21190 |
41969 |
| Engineering Physics |
60529 |
106821 |
| Environmental Engineering |
129113 |
144126 |
| Information Technology |
10837 |
16170 |
| Mathematics and Computing Engineering |
16170 |
25570 |
| Mechanical Engineering |
69563 |
69563 |
| Mechanical Engineering (Automotive Engineering) |
84899 |
113887 |
| Production and Industrial Engineering |
90024 |
169648 |
| Software Engineering |
15705 |
18819 |
DTU Cutoff 2022 for OBC Home State Category
According to the DTU OBC Home State category cutoff 2022, the CSE and Civil Engineering had the Last Round cutoffs of 42576 and 208874, respectively. Based on the cutoffs, the most competitive and least competitive courses were CSE and Biotechnology. Follow the table for more cutoff related details:
| Course Name |
Round 1 |
Last Round |
|---|---|---|
| Biotechnology |
193424 |
262074 |
| Chemical Engineering |
160731 |
199511 |
| Civil Engineering |
168711 |
208874 |
| Computer Science and Engineering |
37538 |
42576 |
| Electrical Engineering |
110941 |
132903 |
| Electronics and Communication Engineering |
84504 |
92663 |
| Engineering Physics |
148448 |
167740 |
| Environmental Engineering |
183919 |
246392 |
| Information Technology |
48821 |
55725 |
| Mathematics and Computing Engineering |
70636 |
80908 |
| Mechanical Engineering |
143443 |
164581 |
| Mechanical Engineering (Automotive Engineering) |
152402 |
171347 |
| Production and Industrial Engineering |
174296 |
223591 |
| Software Engineering |
57134 |
66969 |
DTU Cutoff 2022 for SC Home State Category
See below table for cutoffs based on First and Last Round for several BTech branches under this cateogory. As per this table, the first and last rounds of CSE were concluded at 67767 and 83265, respectively.
| Course Name |
Round 1 |
Last Round |
|---|---|---|
| Biotechnology |
284036 |
592605 |
| Chemical Engineering |
250750 |
512874 |
| Civil Engineering |
273150 |
489991 |
| Computer Science and Engineering |
67767 |
83265 |
| Electrical Engineering |
190540 |
281130 |
| Electronics and Communication Engineering |
140176 |
186773 |
| Engineering Physics |
258604 |
461304 |
| Environmental Engineering |
313029 |
666404 |
| Information Technology |
87555 |
100380 |
| Mathematics and Computing Engineering |
119679 |
153769 |
| Mechanical Engineering |
242800 |
425615 |
| Mechanical Engineering (Automotive Engineering) |
220828 |
471791 |
| Production and Industrial Engineering |
289346 |
589249 |
| Software Engineering |
101466 |
115433 |
DTU Cutoff 2022 for ST Home State Category
According to DTU BTech cutoff 2018, the First and Last Rounds of CSE closed at 207648 and 248596, respectively. As per the CSE cutoffs, it was the most competitive course while the least competitive course was Electrical Engineering. Check the following table for cutoffs for additional specialisations:
| Course Name |
Round 1 |
Last Round |
|---|---|---|
| Chemical Engineering |
508772 |
- |
| Civil Engineering |
200797 |
357678 |
| Computer Science and Engineering |
207648 |
248596 |
| Electrical Engineering |
757268 |
757268 |
| Electronics and Communication Engineering |
599705 |
716587 |
| Environmental Engineering |
574212 |
574212 |
| Information Technology |
308592 |
357521 |
| Mathematics and Computing Engineering |
616572 |
641048 |
| Mechanical Engineering |
734603 |
689273 |
| Software Engineering |
374265 |
528476 |
DTU Cutoff 2022 for EWS Home State Category
The BTech CSE Final Round in the EWS Home State category ended at 24680. In addition, DTU's CSE programme was the toughest to get into in 2018. In addition to that, the Last Round for Civil Engineering was 112498. A list of branch-wise cutoffs is shown below:
| Course Name |
Round 1 |
Last Round |
|---|---|---|
| Biotechnology |
97708 |
128463 |
| Chemical Engineering |
74627 |
93599 |
| Civil Engineering |
82564 |
112498 |
| Computer Science and Engineering |
17072 |
24680 |
| Electrical Engineering |
50879 |
61434 |
| Electronics and Communication Engineering |
35649 |
44595 |
| Engineering Physics |
71908 |
74649 |
| Environmental Engineering |
92411 |
126141 |
| Information Technology |
24350 |
28055 |
| Mathematics and Computing Engineering |
30445 |
35649 |
| Mechanical Engineering |
67535 |
77665 |
| Mechanical Engineering (Automotive Engineering) |
68475 |
81500 |
| Production and Industrial Engineering |
84528 |
113320 |
| Software Engineering |
27768 |
32160 |
DTU Cutoff 2022 for PWD Home State Category
The cutoffs for Mathematics and Computing Engineering and Software Engineering were given in the table below, under which the last Round cutoff for Software Engineering was 860264. Check out the following branch-wise cutoffs:
| Course Name |
Round 1 |
Last Round |
|---|---|---|
| Mathematics and Computing Engineering |
860264 |
- |
| Software Engineering |
- |
860264 |
Also Read:
News & Updates
Photos & Videos
+30
- B Tech (Bachelor of Technology)
- M.E./M.Tech
- MSc (Master of Science)
- B.A (Bachelor of Arts)
- BBA (Bachelor of Business Administration)
- B Des (Bachelor of Design)
- MBA (Masters of Business Administration)
- M.Des
- M.A. (Master of Arts)
- Ph.D.
- Executive MBA
- Engineering
- Science Subject
- Business & Management Study
- IT Software Courses
- Humanities & Social Sciences
- Design
- Mass Communication & Media
- Banking, Finance & Insurance
- Top Colleges Colleges in Delhi/NCR
- Top Mass Communication Colleges in Delhi/NCR
- Top SDGs Institutions Colleges in Delhi/NCR
- Top Government Engineering Colleges in Delhi/NCR
- Top Private Fashion Design Colleges in Delhi/NCR
- Top Skill University Colleges in Delhi/NCR
- Top NITs Colleges in Delhi/NCR
- Top BBA Colleges in Delhi/NCR
- M.Tech colleges in Delhi
- B.Tech colleges in Delhi
- M.Sc. colleges in Delhi
- MBA colleges in Delhi
- Ph.D. colleges in Delhi
- BBA colleges in Delhi
- B.A. colleges in Delhi
- M.A. colleges in Delhi
- B.Des colleges in Delhi
- M.Des colleges in Delhi
- Executive MBA colleges in Delhi
- Engineering colleges in Delhi
- Business & Management Studies colleges in Delhi
- IT & Software colleges in Delhi
- Science colleges in Delhi
Contact Details
Address
Shahbad Daulatpur,
Main Bawana Road,
Rohini, Delhi
Get details of Similar Colleges
Student Forum
Anything you would want to ask experts?Answered a week ago
Dear reader,
Lovely Professional University (LPU) is a great substitute for Delhi Technological University (DTU), even though assessing DTU admission prospects based on your JEE Main scores offers a solid basis for your academic preparation. With cutting-edge research labs, a curriculum that is in l
A
Contributor-Level 10
Answered a week ago
The total tuition fee is now INR 5 Lacs, but it does not include the hostel fee.
M
Beginner-Level 1
Answered 3 weeks ago
If your goal is placements in the tech industry, Thapar Institute of Engineering and Technology COE is generally the better choice. COE has strong placement opportunities, with many software companies hiring from the branch.
If you're genuinely interested in Civil Engineering and prefer a government
T
Beginner-Level 4
Answered 3 weeks ago
There isn't one magic book for LEET that guarantees admission to universities like DTU or Thapar. I've seen most students do well by first covering their Diploma basics properly and then practicing previous year papers as much as possible.
For Mathematics, books like R.S. Aggarwal are quite common, a
P
Beginner-Level 5
Answered 3 weeks ago
The selection of the candidates at DTU for MBA admission will be made on the basis of one or more of the following:
- Work experience
- Academic performance
- Personal interview
R
Contributor-Level 10
Answered 3 weeks ago
Candidates can check below the list of documents required at the time of JAC counselling registration for BTech admission in DTU:
- Mark sheet of Class 12 or equivalent.
- Marksheet of Class 10
- Bonus point document (s), if eligible for IIIT-Delhi bonus point.
- Reserved category / sub-category Certificates.
R
Contributor-Level 10
Answered 3 weeks ago
The total tuition fee of M.Tech at DTU is INR 1.1 Lacs to INR 1.2 lakh. Candidates need to pay the course fee to confirm their admission. This number is taken from the official sources of college. It can change.
R
Contributor-Level 10
Answered 3 weeks ago
Candidates can check below the seat allocation rule followed for admission in M.Tech of DTU for the GATE qualifying students:
The total number of seats (out of 18) should be-
- 60 % (~11) for (aa) i.e B.E/B.Tech. in Engineering
- 40% (~7) for (ab) i.e M.Sc. and (ac) i.e MCA.
- During the spot round, all seats
R
Contributor-Level 10