WBJEE 2027 Chemistry syllabus will be released at official website wbjeeb.nic.in/wbjee. Candidates can check units and topics to prepare for the exam through the WBJEE Chemistry syllabus. While preparing WBJEE Chemistry, candidates are also advised to focus on high weightage topics of Physical, Organic and Inorganic Chemistry and also check good reference materials. Read to know more about WBJEE Chemistry syllabus 2027.
WBJEE 2027 Chemistry Syllabus: West Bengal Joint Entrance Examinations Board (WBJEEB) will release WBJEE 2027 syllabus for Chemistry online at wbjeeb.nic.in/wbjee. The units and topics to be prepared from WBJEE Chemistry syllabus should be checked by the candidates through the official syllabus. According to previous years’ information brochure, there will be a total of 37 core units in WBJEE Chemistry syllabus. The overall level of WBJEE syllabus will be equivalent to 10+2th standard syllabus. WBJEEB will conduct WBJEE 2027 exam as a pen and paper based test. Read to know more about WBJEE Chemistry Syllabus 2027.
- Download WBJEE Syllabus PDF for Chemistry
- WBJEE 2027 Chemistry Syllabus Topics
- WBJEE 2027 Chemistry Syllabus & Pattern Overview
- WBJEE Chemistry Syllabus Weightage
- Important Topics of WBJEE Chemistry Syllabus
- How to Prepare for WBJEE 2027 Chemistry Section?
- Best Books for WBJEE 2027 Chemistry Section
Download WBJEE Syllabus PDF for Chemistry
Candidates can access the WBJEE Chemistry Syllabus PDF from the table given below. Since WBJEE 2027 syllabus has not been released yet, the previous years’ syllabus PDF can be checked for reference.
| Year |
Syllabus PDF |
|---|---|
| WBJEE 2027 |
Will be available soon |
| WBJEE 2026 |
Commonly asked questions
WBJEE mock tests and sample papers are important to help students work on their time management. Solving mock tests and sample papers will help them know how to divide their time for each section so that they complete the exam on time. Students should include mock tests in their daily exam preparation plan.
WBJEE syllabus will be available online. Level of WBJEE syllabus will be similar to 12th class qualifying examination. Difficulty level of exam can range from moderate to tough. Students should check syllabus carefully and prepare for exam with books used for their board exams.
The official WBJEE syllabus consists of topics from Physics, Chemistry and Mathematics. All of the units, concepts and topics present in the WBJEE syllabus will be similar to the 12th standard qualifying examination. Students have to check the syllabus carefully to prepare for the entrance exam.
During WBJEE preparation, students should regularly revise. This will help them to remember what they have studied before. Daily revision also makes sure students do not forget important topics. Revision is considered important for exam preparation.
WBJEE 2027 Chemistry Syllabus Topics
Candidates can check the units and topics to prepare for WBJEE 2027 Chemistry section. Since the updated syllabus has not been released yet, the previous years’ topics given below can be checked for reference.
| Units |
Topics |
|---|---|
| Some Basic Concepts of Chemistry |
Laws of chemical combination. Concept of elements, atoms and molecules. Atomic and molecular masses. Mole concept and molar mass, percentage composition, empirical and molecular formula, chemical reactions, stoichiometry and calculations based on stoichiometry. Different concentration terms of solutions and related calculations. |
| Structure of an Atom |
Bohr’s model and its limitations, concept of shell and sub-shells, dual nature of matter and light, de Broglie’s relationship, Heisenberg uncertainty principle, Schro dinger wave equation (elementary idea only). Concept of orbitals, quantum numbers, shapes of s, p and d orbitals, rules for filling electrons in orbitals: Aufbau principle, Pauli’s exclusion principle and Hund’s rule, exchange energy, electronic configuration of an atom, stability of half-filled, completely filled orbitals. |
| Classification of Elements and Periodicity in Properties |
Modern periodic law and the present form of the periodic table; periodic trends in the properties of elements – atomic radii, ionic radii, van der Waals’ radii, ionization enthalpy, electron gain enthalpy, electronegativity, valency. Nomenclature of elements with atomic number greater than 100. |
| Chemical Bonding and Molecular Structure |
Valence electrons, ionic bond, bond parameters, covalent bond, Lewis structure, formal charge, polar character of covalent bond, covalent character of ionic bond, valence bond theory, resonance, geometry of covalent molecules, VSEPR theory, concept of hybridization involving s, p and d orbitals and shapes of some simple molecules, intermolecular interactions (dipolar interactions, London dispersion forces, van der Waals’ interactions), intra- and intermolecular hydrogen bonding, Molecular orbital theory of homonuclear diatomic molecules (H2, He2, O2, N2, F2 – qualitative idea only) |
| States of Matter - Solids and Gases |
Classification of solids (elementary idea): molecular, ionic, covalent and metallic solids, amorphous and crystalline solids (elementary idea), unit cell in two-dimensional and three-dimensional lattices, packing efficiency, calculation of density of unit cell, packing in solids, voids, number of atoms per unit cell in a cubic unit cell, point defects. Kinetic theory of gas, molecular speeds, Dalton’s law of partial pressure, Graham’s law, deviation from ideal behaviour and van der Waals’ equation of state, Liquefaction of gases, critical parameters. |
| Chemical Thermodynamics |
Concepts of system (including types of system), surroundings. Work, heat, energy, extensive and intensive properties, state function, Zeroth law of thermodynamics and definition of temperature. The first law of thermodynamics – internal energy change (∆U) and enthalpy change (∆H), Enthalpy of bond dissociation, combustion, formation, atomization, ionization, solution and sublimation. Transformation of state. Hess’s law of constant heat summation, Born Haber Cycle and its application. 2nd law of thermodynamics, the introduction of entropy as a state function, Gibbs free energy change for spontaneous and nonspontaneous processes, criteria for equilibrium. |
| Equilibrium |
Equilibrium in physical and chemical processes, dynamic nature of equilibrium, law of mass action, equilibrium constant, factors affecting equilibrium – Le Chatelier’s principle; ionic equilibrium, ionisation of acids and bases, strong and weak electrolytes, degree of ionisation of polybasic acids, acid strength, concept of pH, Henderson Equation. Hydrolysis of salts (elementary idea). Buffer solutions, buffer action, solubility product, common ion effect (with illustrative examples). |
| Solutions |
Introduction, solubility of gases in liquids, solid solutions, vapour pressure and Raoult’s law. Colligative properties: relative lowering of vapour pressure, elevation of boiling point, depression of freezing point, and osmotic pressure. Determination of molecular mass using colligative properties. Abnormal molecular mass, van’t Hoff factor and calculations involving it. Colloidal solution, true solutions, colloids and suspensions. |
| Chemical Kinetics |
Rate of a reaction (average and instantaneous), factors affecting the rate of reaction: concentration, temperature and catalyst. Order and molecularity of a reaction. rate law and specific rate constant, integrated rate equations and half-life (only for zero and first order reactions), Arrhenius equation, activation energy, the concept of collision theory (elementary idea, no mathematical treatment). Catalysis, homogeneous and heterogeneous catalysis, enzyme catalysis. |
| Redox Reactions |
Concept of oxidation and reduction, redox reactions, oxidation number, balancing redox reactions in terms of loss and gain of electrons and change in oxidation number, applications of redox reactions in permanganometry and dichromatometry. |
| Electrochemistry |
Conductance in electrolytic solutions, specific and molar conductivity, variation of conductivity with concentration, Kohlrausch’s law, electrolysis and laws of electrolysis (elementary idea), dry cell – electrolytic cells and Galvanic cells, emf of a cell, standard electrode potential, Nernst equation and its application to chemical cells, relation between Gibbs free energy change and emf of a cell, fuel cells, Li-ion battery |
| Organic Chemistry: Some Basic Principles |
General introduction, classification and IUPAC nomenclature of organic compounds. Electronic displacements in a covalent bond: inductive effect, resonance and hyperconjugation. Homolytic and heterolytic fission of covalent bonds: free radicals, carbocations and carbanions, electrophiles and nucleophiles. Types of organic reactions: elementary idea of addition, elimination and substitution reactions. |
| Hydrocarbons: Classification of Hydrocarbons |
Alkanes –Nomenclature, isomerism, conformations (ethane only), physical properties (up to 6 carbons) and chemical reactions including halogenations, free radical mechanism, combustion and pyrolysis. Alkenes – Nomenclature, structure of double bond (ethene), geometrical isomerism, physical properties (up to 3 carbons) and methods of preparation. Chemical reactions: addition of hydrogen, halogen, water, hydrogen halides (Markovnikov’s addition and peroxide effect), ozonolysis and oxidation. Mechanism of electrophilic addition. Alkynes – Nomenclature, structure of triple bond (ethyne), physical and chemical properties (up to 3 carbons) and preparation, Chemical reactions; addition of hydrogen, halogens, hydrogen halides and water. Aromatic hydrocarbons - Introduction, IUPAC nomenclature. Benzene; resonance, Huckel’s rule and aromaticity, chemical properties, mechanism of electrophilic substitution – nitration, sulphonation, halogenations, Friedel-Crafts alkylation and acylation. |
| Haloalkanes |
Nomenclature, nature of C-X bond, physical and chemical properties, and mechanism of substitution reactions. Stability of carbocations. R/S and D/L configurations. Uses and environmental effects of dichloromethane, trichloromethane, tetrachloromethane, iodoform, and freons. |
| Haloarenes |
Nature of C-X bond, substitution reaction (directive influence of halogen for monosubstituted compounds only), stability of carbocations. Uses and environmental effects of DDT. |
| Alcohols |
Nomenclature, methods of preparation, physical and chemical properties (primary alcohols only), identification of primary, secondary and tertiary alcohols, mechanism of dehydration, uses of methanol and ethanol. |
| Phenols |
Nomenclature, methods of preparation, physical and chemical properties, acidic nature of phenols, electrophilic substitution reaction, and uses of phenolic compounds. |
| Ethers |
Nomenclature, methods of preparation, physical and chemical properties, and uses. |
| Aldehydes and Ketones |
Nomenclature, nature of carbonyl group, methods of preparation, physical and chemical properties, mechanism of nucleophilic addition, reactivity of alpha hydrogen in aldehydes, and uses. |
| Carboxylic Acids |
Nomenclature, acidic nature, methods of preparation, physical and chemical properties, and uses. |
| Nitro compounds |
General methods of preparation and reduction reactions. Amines: Nomenclature, classification, structure, methods of preparation, physical and chemical properties, uses, identification of primary, secondary and tertiary amines. |
| Cyanides and Isocyanides |
Nomenclature, structure, methods of preparation, and chemical reactions (hydrolysis and reduction reactions only). |
| Diazonium salts |
Preparations, chemical reactions and importance in synthetic organic chemistry. |
| Carbohydrates |
Classification (aldoses and ketoses), monosaccharides (glucose and fructose), D/L configuration, oligosaccharides (sucrose), polysaccharides (starch, cellulose) |
| Proteins |
Elementary idea of α-amino acids, zwitterionic structures of amino acids, peptide bonds, polypeptides, structure of proteins (primary structure only), denaturation of proteins, and enzymes. |
| Nucleic Acids |
DNA & RNA (introduction and basic concepts) |
| Polymers |
Classification (natural and synthetic), methods of polymerisation (addition and condensation), and copolymerization. Some important polymers like polythene, nylon, polyesters, Bakelite, and rubber. Biodegradable and non- biodegradable polymers. |
| s-Block Elements (Group 1 and Group 2 elements) |
Electronic configuration, occurrence, trends in the variation of properties (such as ionization enthalpy, atomic and ionic radii), trends in chemical reactivity with oxygen, water, hydrogen and halogens, hydrides (ionic, covalent and interstitial), hydrogen peroxide (preparation, properties, structure & use), hydrogen as a fuel. Biological importance of Na, K, Mg, and Ca. |
| p-Block Elements |
General introduction to p-block elements, electronic configuration, occurrence, variation in properties, oxidation states, and trends in chemical reactivity. |
| Groups |
Group 13: Boron-physical and chemical properties of compounds of Boron, boron oxides, boric acid, borates, B2H6 and inorganic graphite. Aluminum: Reactions of Al with acid and alkali, uses of Al, preparation and uses of LiAlH4 and Al2O3. Group 14: Carbon: Catenation, allotropic forms, nano carbon, graphene, physical and chemical properties of two oxides of carbon- CO and CO2, Silicon: Some compounds of silicon and their important uses –silicon tetrachloride (structure, preparation, hydrolysis and reduction reaction only), silicates [structure of open chain silicates constructing of (SiO3)𝑛 2𝑛− ions], use of zeolites. Group 15 : General introduction, electronic configuration, occurrence, oxidation states. Structure and reaction of NH3, HNO3, NCl3, oxides of nitrogen (structures only). Phosphorus – allotropic forms (white and red), preparation and properties of phosphine, phosphorus halides (PCl3 and PCl5) and oxoacids (elementary idea only). Group 16: General introduction, electronic configuration, occurrence, oxidation states. Oxygen-classification of oxides. Preparation and properties of ozone. Sulphur-allotropic forms (rhombic and monoclinic). Properties and uses of oxides, oxoacids and peracids of Sulphur. Group 17: General introduction, electronic configuration, oxidation states, occurrence, trends in physical and chemical properties. Compounds of halogen - preparation, structure and uses of oxides, oxoacids of halogens, interhalogen compounds. Elementary idea of pseudohalogens and polyhalides. Group 18: General introduction, electronic configuration, occurrence, and uses of noble gases. Preparation, structure and chemical reactions of XeO2, XeO3, XeF2, XeF4, XeF6, XeOF2. |
| d and f Block Elements |
General introduction, electronic configuration, occurrence and characteristics of transition metals, general trends in properties of the first-row transition metals – ionic radii, ionisation enthalpy, oxidation states, colour, catalytic and magnetic properties. Preparation and properties of K2Cr2O7 and KMnO4. |
| Lanthanoids |
Electronic configuration, oxidation states, chemical reactivity, lanthanoid contraction and its consequences, uses. |
| Actinoids |
Electronic configuration, oxidation states, comparison with lanthanoids, uses. |
| Coordination Compounds |
Introduction, ligands, classification of ligands based on denticity and field strength, coordination number, colour, and magnetic properties. IUPAC nomenclature of mononuclear coordination compounds, EAN rule, Bonding (Werner’s theory, VBT and CFT), CFSE, structuralisomerism and stereo- isomerism, importance of coordination compounds (in qualitative analysis, extraction of metals and biological systems) |
| Environmental Chemistry |
Environmental pollution – air, water and soil pollution (cause and effects), primary and secondary pollutants (solid and liquid), chemical reactions in the atmosphere, smog, pollution due to industrial wastes, solid waste management (elementary idea only), SPM, RSPM, green chemistry as an alternative tool for reducing pollution. Water preservation and protection. Strategy for control of environmental pollution. |
| Qualitative and Quantitative Analysis |
Detection of special elements (N, S, halogens) in organic compounds by the Lassaigne test. Identification of the following functional groups present in organic compounds: primary aromatic amine, aldehyde, ketone, carboxylic acid and unsaturation. Calculations based on acid-based and redox titration (dichromatometry and pernanganometry). Detection of water-soluble non-interfering acid and basic radicals by dry and wet tests among the following: Acid radicals: Cl-, S2-, SO4 2-, NO2-, NO3-, CO32- Basic radicals: Cu2+, Al3+, Fe2+, Fe3+, Zn2+, Ca2+, Mg2+, Na+, NH4+ |
WBJEE 2027 Chemistry Syllabus & Pattern Overview
Candidates are advised to check the official pattern to know how WBJEE Chemistry section will be held. According to official exam pattern, the WBJEE Chemistry section will consist of 40 questions. The maximum marks that the candidates can secure in the Chemistry section is 50. The section will be divided into three categories with different marking schemes.
- Category I Questions: 30 Questions (+1 / -¼ marks)
- Category II Questions: 5 Questions (+2 / -½ marks)
- Category III Questions: 5 Questions (+2 / no negative marking)
Commonly asked questions
WBJEE syllabus is important for exam preparation. To prepare their study plan, students have to be familiar subjects and topics in syllabus. Students should check WBJEE syllabus regularly so they are updated on what has to be studied.
Yes, the WBJEE syllabus will be similar to the 12th standard qualifying examination. The topics and units of Physics, Chemistry and Mathematics will be similar to the ones the candidates studied for their board exams. Students can refer to their board exam books to prepare for WBJEE.
WBJEE is held offline as a pen and paper based test. Students have to report to centre and attempt exam in an OMR sheet. Out of the given options for each question, student will have to mark correct one with their pen and submit it.
Since syllabus level of WBJEE is similar to board exams, students should check NCERT books for preparation. However, for a better understanding of concepts and topics of WBJEE syllabus, students should also check other important reference books.
Explore colleges based on WBJEE
WBJEE Chemistry Syllabus Weightage
For preparation, candidates can check the WBJEE Chemistry chapter-wise weightage. It is to be noted that the weightage is based on previous years’ WBJEE question papers.
| Chapters |
Weightage |
|---|---|
| p,d and f – Block Elements |
6% |
| Redox Reactions |
5% |
| Ionic Equilibrium |
4% |
| Chemical Bonding |
6% |
| Chemical Kinetics |
7% |
| Coordination Compounds |
4% |
| Organic Chemistry |
6% |
| Ionic Equilibrium |
4% |
Important Topics of WBJEE Chemistry Syllabus
Some important topics to prepare from WBJEE Chemistry syllabus can be checked below.
| Units | Important Topics |
|---|---|
| Physical Chemistry | Chemical Kinetics, Chemical Thermodynamics & Energetics, Chemical and Ionic Equilibrium, Electrochemistry and Redox, Atomic Structure and Solutions |
| Inorganic Chemistry | Chemical Bonding & Molecular Structure, Coordination Compounds, Periodic Table & Block Elements (s, p, d, and f) |
| Organic Chemistry | General Organic Chemistry, Aldehydes, Ketones & Carboxylic Acids, Hydrocarbons, Haloalkenes/Arenes & Alcohols/Phenols |
Commonly asked questions
For a good preparation, students should check popularly used books for WBJEE. Along with books, students can also attempt mock tests and sample papers regularly. Previous years' question papers are also available for students to solve and practice.
WBJEE syllabus should be studied entirely to have a good chance of scoring high marks. Since question paper will be prepared using syllabus, they can expect any topic or concept to be used for questions.
Students can check previous years' WBJEE question papers to check topics and questions that are repeatedly present and have high weightage. These topics can be picked out as important topics and students can focus on them during preparation. Students should make sure that entire syllabus is also covered.
During WBJEE preparation, students should practice with mock tests. These mock tests will help know how examination will be held. This will make it easier for students to prepare for exam. Mock tests also help students know important topics to study for exam.
How to Prepare for WBJEE 2027 Chemistry Section?
Candidates can check some important WBJEE 2027 preparation tips for the Chemistry section. By following these topics, they will have a higher chance of scoring good marks in the exam.
Be Familiar with Exam Pattern and Syllabus: Before starting preparation, candidates should become familiar with the official WBJEE exam pattern. This will help them to understand how each question category will be marked. Since Category I and II questions have negative marking, candidates are advised to be careful during the exam. Through the syllabus, they can know which topics have to be prepared.
Focus on Important Topics: While the entire syllabus should be prepared, candidates are advised to focus on important topics, which are likely to be repeated and have higher weightage. Since Organic Chemistry often has more weightage, candidates are advised to check relevant topics.
Practice Time Management: Since Chemistry is a combined paper with Physics, candidates are given only 2 hours to complete the exam. They should practice so that they are able to complete both sections within the allocated time.
Revise with Previous Years’ Questions: Candidates are advised to check last 5 years’ WBJEE question papers and practice regularly. This will help them to understand the question models, repeated patterns and more.
Document Mistakes: While attempting previous years’ question papers, candidates should document their commonly made mistakes and correct them. This will ensure that they will not make the same mistakes again during the exam.
Best Books for WBJEE 2027 Chemistry Section
Candidates can check some best books for WBJEE Chemistry section.
| Name | Author/Publication |
|---|---|
| NCERT Chemistry | NCERT |
| Physical Chemistry | N Awasthi |
| Physical Chemistry | OP Tandon |
| Organic Chemistry | Morrison & Boyd |
| Organic Chemistry & Inorganic Chemistry | OP Tandon |
| Elementary Problems in Organic Chemistry | MS Chouhan |

News & Updates
Explore Other Exams
24 Oct '26 - 22 Nov '26 | JEE Main 2027 Registration Ses... |
23 Nov '26 - 26 Nov '26 | JEE Main 2027 Registration Ses... |
Apr '27 | JEE Advanced 2027 Registration |
May '27 | JEE Advanced Admit Card 2027 R... |
Dec '26 | BITSAT 2027 Application Form S... |
Mar '27 | BITSAT 2027 Form Correction Se... |
Feb '27 | TS EAMCET Application Form 202... |
Apr '27 | TS EAMCET 2027 form correction |
Feb '27 | COMEDK Application Form 2027 |
Feb '27 | COMEDK Mock Test Release Date ... |
Jan '27 | KEAM 2027 registration |
Feb '27 | KEAM 2027 last date to upload ... |
Student Forum
Answered 3 weeks ago
The Brainware University the highest closing rank for WBJEE 2026 was 90,685 for the B.Tech. in CSE program. Students seeking admission to Brainware University's B.Tech. programme can apply for CSE, as it is the easiest branch to secure a seat in.
M
Contributor-Level 10
Answered 2 months ago
Adamas University WBJEE 2026 Round 3 cutoff is out for BTech. For the General AI category, the Round 3 cutoff ranges from 58967 for BTech in Mechanical Engineering to 92641 for BTech in Biotechnology. BTech in Mechanical Engineering is the most competitive branch for admission.
S
Contributor-Level 10

Education: B.A. (Hons) in Psychology (Lady Shri Ram College for Women)
Expertise: Engineering Entrance Exam Expert
About
Saakshi Varsha Lama has been associated with Shiksha since 2021 and brings with her over nine
Read Full Bio