GATE 2017 was held on February 4 in two slots ME as the major dicipline. It covered 5 Streams viz. ME,AR,TF,AG,GG. As known already, earlier ME used to be conducted in 3 Slots, but this year it was conducted in 2 Slots only. The exam went off smoothly with no major issues being reported from students across cities.
As per the usual format of GATE exam, the online exam consisting of questions on Technical Stream-wise Concepts, Engineering Maths & General Aptitude, was to be completed in a total time of 180 minutes. There was no problem reported as such for the online portal and the exam interface as everything went on smoothly.
Explore colleges based on GATE
Check GATE 2017 Student Reactions!
Take a look at GATE 2017 Exam analysis by GATEForum and TIME Education experts:
GATE 2017 Brief Analysis by Mohit Goel, CEO, Thinkcell Learning Solutions(GATE Forum)
(Based on student test experiences in the stream of ME - Forenoon session)
Comments of Paper:
- ME paper I had more concept based questions than only formula based questions.
- Compared to last year, Engineering Mechanics weightage has come down while it is increased in Strength of Materials, Thermal Science and manufacturing Science.
- In remaining topics IIT Roorkee has followed almost the same weightage compared to last year.
- In general the overall difficulty level of the paper is higher than last year.
- In remaining topics IIT Roorkee has followed almost the same weightage compared to last year.
- In general the overall difficulty level of the paper is moderate than last year.
GATE 2017 Exam Analysis by MV Reddy, President, TIME Education
Question Pattern
A higher proportion of Numerical Questions appeared in ME Stream and it was also observed that there were more Numerical Answer Type (NAT) questions in comparison to last year. Both the above factors made the exam slightly tricky as there were lesser number of direct Theoretical questions and Multiple-Choice-Questions(MCQ's), which are usually easier to attempt than Fill-in-the-blank questions.
Exam Interface
The exam interface for GATE’17 was similar to last year. With the Virtual Calculator already being put on GATE 2017 website, students who had had sufficient practice of the calculator on the website were at a slight advantage.
Overall the user interface of GATE’17 was mostly similar to the one provided in the Mock GATE exams provided by T.I.M.E. where a student gets a complete view of his attempted questions along with questions marked for review.
Exam Analysis
Mechanical Engg.
(a) Forenoon Slot: There were good no.of questions from Strength of Materials, Thermodynamics &Fluid Mechanics, but substantial weightage was given to Manufacturing Technology. Questions from Design Part were moderate in number as well as the complexity.Level of questions in Engg. Maths & Aptitude was easy and most of the questions could be easily answered.
Overall, the paper was between Moderate to Difficult as compared to that of last year.
Distribution of Marks:
| Subject |
1 Mark Q |
2 Mark Q |
Total Marks |
| Heat Transfer |
1 |
2 |
5 |
| SOM |
3 |
3 |
9 |
| Engg.Mechanics |
1 |
2 |
5 |
| FM |
4 |
3 |
10 |
| Machine Design |
2 |
1 |
4 |
| Manufacturing Technology |
5 |
6 |
17 |
| Industrial Engg. |
0 |
2 |
4 |
| TOM |
1 |
3 |
7 |
| Thermodynamics |
1 |
4 |
9 |
|
|
|
|
70 |
(b) Afternoon Slot: More or Less Equal weightage has been given for core subjects in the exam conducted in the Noon Slot. The no.of MCQ's and NAT Questions are approximately equal in number. However in terms of marks wise NAT Questions has little more weightage compared to MCQ's.This time answers for NAT type questions can be typed from computer keyboard also.Overall the paper was found to be Moderate.
Distribution of Marks:
| Subject |
1 Mark Q |
2 Mark Q |
Total Marks |
| Heat Transfer |
2 |
2 |
6 |
| SOM |
4 |
1 |
6 |
| Engg.Mechanics |
0 |
1 |
2 |
| FM |
3 |
3 |
9 |
| Machine Design |
1 |
4 |
9 |
| Manufacturing Technology |
4 |
4 |
12 |
| Industrial Engg. |
2 |
2 |
6 |
| TOM |
2 |
4 |
10 |
| Thermodynamics |
2 |
4 |
10 |
|
|
|
|
70 |
Check GATE 2017 important dates here!
Pre - Exam Analysis:
According to M V Reddy, President, T.I.M.E Education, there are no surprises expected in the exam this year. He said, “ We are not expecting any kind of surprises in the exam this year. GATE is a pretty stable exam and unlike other exams, the exam pattern is not expected to change with every passing year. The papers would be similar to what it was last year”.
“At this hour, aspirants should not start a new topic, remain calm and do what they like doing the most. Eating well and sleeping on time is very important too”, he said sharing his views on last minute exam preparation.
GATE 2017 will be further held on February 5, 11 and 12 (Saturdays and Sundays only) by IIT Roorkee, the organizing institute of the exam.
Last Minute Tips for GATE 2017
Also read:
- GATE 2017 Mock Test For Different Papers
- PSUs accepting GATE scores for recruitment
- GATE 2017 Eligibility & Exam Centers
News & Updates
Explore Other Exams
5 May '26 | JEE Main 2026 paper 2 result s... |
4 May '26 | JEE Main 2026 paper 2 final an... |
17 May '26 | TS EAMCET 2026 result |
12 May '26 | TS EAMCET 2026 Engineering ans... |
18 Jun '26 - 21 Jun '26 | AP EAPMCET Result 2026 |
25 May '26 | AP EAMCET 2026 Answer Key Rele... |
Jun '26 | OJEE result 2026 |
Jun '26 | Special OJEE registrations 202... |
May '26 | AISECT Joint Entrance Exam 202... |
Jun '26 | AISECT Joint Entrance Exam 202... |
Student Forum
Answered 22 hours ago
Yes, many private colleges like VIT, SRM, Manipal, Amity, and LPU offer M.Tech without GATEas they conduct their own entrance tests. BITS Pilani offers a work-integrated M.Tech for professionals.
T
Contributor-Level 10
Answered 2 days ago
Candidates are offered seat in M.Tech based on GATE scores at NIT Goa. The seats are allotted via CCMT Counselling. In case the seats remain vacant, Non-GATE aspirants can also get admission by passing the written test conducted by the institute.
N
Guide-Level 15
Answered 2 days ago
If you are seeking admission in NIT Jamshedpur MTech, then GATE is mandatory. Students applying for non-MTech programmes do not need to appear for GATE. For M.Tech however, GATE followed by the centralised counselling is mandatory. Unless a student is applying through the self-financed/ sponsored ca
A
Contributor-Level 10
Answered 3 days ago
Non-GATE candidates are offered admission in M.Tech based on institute-level examination. NIT Srinagar conducts an entrance test to fill up self-sponsored/ sponsored category and vacant seats after the CCMT Counselling is over. Such candidates have to apply on the institute's website and appear for
N
Guide-Level 15
Answered a week ago
According to topper's and experts, the ideal number of questions to attempt correctly is 50 to 55, to obtain a GATE rank under 1000.
B
Contributor-Level 7
Answered a week ago
Candidates who have qualified GATE exam are given preference for admission in M.Arch in BMS School of Architecture. But those who have qualified Karnataka PGCET are also considered for admission.
S
Contributor-Level 10
Answered a week ago
hi,
With a GATE EC 2026 score of 609 under the EWS category, you have a strong profile for M.Tech in VLSI and related specializations. Along with IITs and NITs, Lovely Professional University is also a good option to consider for advanced studies in VLSI and Electronics. LPU offers industry-oriented
Answered 2 weeks ago
Yes, GATE qualified candidates will also have to appear for the PGET exam held on the scheduled date. The merit list will combine performance of both WBUT and GATE paper.
S
Contributor-Level 7
Answered 2 weeks ago
Yes, WBUT PGET do accept GATE score for admission. The merit list will be prepared considering 70% weightage to GATE scores and 30% to PGET.
I
Contributor-Level 7
Answered 2 weeks ago
Candidates with GATE score of 2026, 2025 or 2024 are eligible for BITS HD 2026 entrance examination.
T
Contributor-Level 7
