2 Videos,

35 Photos

B.Tech. in Production and Industrial Engineering
at DTU, Rohini

4.3 /5

(66 Reviews)

3 Student Q&A

A NAAC accredited
Public/Government University
Estd. 1941

B.Tech. in Production and Industrial Engineering

Table of contents

Overview
Fees
Rankings
Curriculum
Student Reviews
+ 4 more items

B.Tech. in Production and Industrial Engineering
at
DTU
Overview

DTU offers a 4 years B.Tech. in Production and Industrial Engineering programme. The institute offers the course at UG level in Engineering stream. B.Tech. in Production and Industrial Engineering offered at DTU is ranked at #27 in NIRF 2024 ranking under the Engineering category. The total tuition fee for the course is INR 7,40,000. Candidates can check out the below table for more information on DTU B.Tech. in Production and Industrial Engineering:

Total Tuition Fees	₹7.40 Lakh Get Fees details
Duration	4 years Get Curriculum
Course Level	UG Degree
Mode of Course	Full Time
Average package	₹ 9.56 Lakh
Official Website	Go to Website
Seat breakup	77
Type of University	Public/Government

B.Tech. in Production and Industrial Engineering
at
DTU
Fees

The total fee of DTU B.Tech. in Production and Industrial Engineering is a combination of various components. The DTU B.Tech. in Production and Industrial Engineering fee is the combination of tuition fees along-with other fees such as one-time admission fees, exam fees, registration fees, etc. It is to note that the tuition fee is calculated basis the first semester, hence the actual amount may vary as other fee components are added as well.

Fee components	Amount (4 years)
Tuition Fees	₹ 7.40 Lakh
Hostel Fees Meal Plan is not included in mentioned fee. Mess advance is included in the mentioned fee. Hostel fee mentioned above is for cheapest option available. For other options available, please refer to fee Read more Meal Plan is not included in mentioned fee. Mess advance is included in the mentioned fee. Hostel fee mentioned above is for cheapest option available. For other options available, please refer to fee pdf	₹ 2.43 Lakh
One-time Payment One time fee Include the Alumni Association life membership, registration fee	₹ 1,000
Total fee	₹ 9.84 Lakh

These are based on information available on various sources. Latest values may differ.

View scholarships

Stories

Highlights

College Reviews

Placements

Infrastructure

Eligibility & Cut Offs

Compare

B.Tech. in Production and Industrial Engineering
at
DTU
Rankings

DTU has ranked its B.Tech. in Production and Industrial Engineering course #27 by the NIRF Ranking 2024. NIRF Ranking depends on parameters such as Learning and Resources, Teaching, Research and Graduation Outcomes and Perception. Students can check the DTU rankings for B.Tech. in Production and Industrial Engineering in this space:

B.Tech. in Production and Industrial Engineering
at
DTU
Curriculum

Students can download the DTU B.Tech. in Production and Industrial Engineering curriculum from the link provided below. Candidates will be able to access semester-wise course structure, electives and detailed course content in the curriculum PDF. The detailed course curriculum details for B.Tech. in Production and Industrial Engineering is provided below:

B.Tech. in Production and Industrial Engineering
at
DTU
Students Ratings & Reviews

4.3/5

61 Verified Reviews Info Icon

4-5
42
3-4
16
2-3
3

Placements4.3

Infrastructure4.3

Faculty & Course4

Campus Life4.4

Value for Money4.3

What students say about DTU - Delhi Technological University

Placements

Infrastructure

Faculty

Other

LikesView All

The top recruiting companies are IOCL, Reliance, Phillips, Siemens, Hero Motto Corp, Bajaj, Nestle, ITC, ExxonMobil, etc.

Based on 24 Reviews

Saurabh Chauhan Verified Icon

B.Tech. in Production and Industrial Engineering - Batch of 2028

4.2

4Placements4Infrastructure4Faculty4Crowd & Campus Life5Value for Money

Extremely good college with all facilities.

Placements: Most of the people prefer core and non-teach jobs, teach jobs are minimal. On-campus placements are somewhat like 50 percent, others get from off-campus. Last year, a student got a teach job of 32 LPA, he had 9+ CGPA. Most of the tech companies don't even allow this branch.

Infrastructure: Some labs are very advanced and have almost all facilities and apparatus, but some even lack basic facilities like fans, and some have broken and outdated apparatus. Talking about hostel, they are good enough. Food is not too good, but it is good enough and healthy.

Faculty: Teachers are very experienced, but some of them are too old for teaching. They often teach by conventional methods, which students feel difficult to understand. Other teachers are very good, they are motivated and also motivate students to learn well. They teach well, provide notes, and assignments too.

Other: Fests are widespread; each semester has almost 3-4 fests with excellent artist lineups. College provides scholarships to poor students. Campus has a large sports complex.

Reviewed on 6 Jan 2026Read More

Abhishek Sharma Verified Icon

B.Tech. in Production and Industrial Engineering - Batch of 2028

3.6

4Placements4Infrastructure3Faculty4Crowd & Campus Life3Value for Money

My college, let's see what it looks like.

Placements: Production and industrial engineering is a very versatile branch. You can go into core, non-tech, and few tech companies from this branch. From last 4 year, its average package is increasing constantly than other branches. The highest package in 2024 was around 31 LPA with an average package of 12.32 LPA. Placement percentage was around 70% which is the highest in mechanical department. Top recruiters are Brain and Co, American Express, and Accenture. Internships by students are very less due to high competition in college. The internship percentage is around 5%-10%. Top roles offered are consultant and business analyst.

Infrastructure: Our college has one of the best infrastructure in Delhi. It is equipped with the best labs and classrooms. Hostels too are good and well-maintained with good mess where you can eat at a very affordable price.

Faculty: Faculty members are very knowledgeable and master of their subjects. Teaching quality depends from professor to professor but that does not mean they are competent in their subjects. Course curriculum is well structured and updated to the industry standard. It has a minor program as well. You can do any field you want. Semester exams are of moderate level and the passing percentage is more than 90%.

Other: I chose this course because of my interest and its brand value in the market. Its infrastructure and surroundings are one of the best in India. Classrooms can be more comfortable.

Reviewed on 1 Feb 2025Read More

KESHAV KUMAR Verified Icon

B.Tech. in Production and Industrial Engineering - Batch of 2028

4.6

5Placements5Infrastructure4Faculty4Crowd & Campus Life5Value for Money

DTU is one of the best college with good infrastructure and good placement.

Placements: The placements in my branch are very good. The highest package is more than 30 LPA and the average package is 12-14 LPA. Top companies that visit our branch are Goldman Sachs and McKinsey. More than 60% of students get placement. Roles offered in our course are Consultant, Analyst, and Business Development. These types of roles are offered in our course.

Infrastructure: The facilities of our course are very good. Labs are well-maintained and proper instruments are also provided. Library is also well-maintained and proper books are also arranged. Wi-Fi connection is also provided across the campus. Infrastructure of the hostels is also good. Mess food is also good and provided 4 times a day. Infrastructure is also good like the sports complex, health center, and OAT (open-air theater). Best food courts are available such as Nescafe, KitKat, Domino’s, Amul, and Raj Soin.

Faculty: Teachers are very helpful and they try to solve all the doubts of the students. They are well-qualified and have good knowledge. Their teaching quality is very good. They try their best that every student achieve their goals and get success in their life. The difficulty level of semester exams is above average. In the last semester, the passing criteria is 35 out of 100, but now we have to get 35% in theory and also in practical respectively.

Reviewed on 27 Jan 2025Read More

Yash Gupta Verified Icon

B.Tech. in Production and Industrial Engineering - Batch of 2028

3.8

3Placements4Infrastructure4Faculty4Crowd & Campus Life4Value for Money

Good faculty members, average placements for production branch, good infrastructure and facilities.

Placements: Around 32.86% of students were placed in 2024 from the production branch. The highest salary package offered for 2024 was 31 LPA. The lowest salary pacakge offered is 6 LPA. The average salary package offered is 12.32 LPA. Top recruiting companies are Adobe, Amazon, Google, etc. Around 5% of students got internships in 1st year till now. We can definitely go for mechanical jobs in Maruti and other automotive companies.

Infrastructure: Infrastructure of DTU is good. All classes are air-conditioned. Our campus is very lush green. Library is also pretty big, labs are good with all machinery needed. Wi-Fi is available in almost all the places we go on campus mainly near buildings. Some hostels are pretty average but some are good too. Wi-Fi is available in hostels. Food quality and taste in mess and canteen is also pretty good. I would say above average. Medical facility is good too and it is near the hostels so no worries. Sports complex is massive too.

Faculty: Teachers are highly qualified at DTU. But the thing is that in first year some teachers are scholars who teach us. Most teachers have their own books. Course curriculum is semi-relevant I would say. It makes students industry ready but we need to put some efforts from our side too. Semester exams are not that difficult but average. Pass percentage is like 75-80%.

Other: I chose this course because thats all I could get from my rank. In production engineering, we have 80% mechanical engineering and 20% in management subjects. Fests are the only thing about DTU that we cannot complain about. Fests are massive. There are plenty of societies, we can join if we are interested.

Reviewed on 24 Jan 2025Read More

Mayank

B.Tech. in Production and Industrial Engineering - Batch of 2028

3.4

3Placements3Infrastructure2Faculty5Crowd & Campus Life4Value for Money

Infrastructure, Fest, College Life is up to Mark.

Placements: Almost 50% of students are placed. The lowest was 6 LPA, the average is 10 LPA, and the highest was 17 LPA. There is no official data for internships. Top companies are Goldman Sachs, McKinsey. Top roles are Consultant, Analyst, and Business Development roles. Overall, placements are decent according to the health of the corporate sector.

Infrastructure: Classrooms are genuinely good. Enabled with good lighting, fans, and large AC plants. Classrooms in AB (Academic Blocks) have good cushioned seats also. Projectors are enabled in classes, but rarely any teacher uses them. The hostels of 1st years are like storerooms—very small in size, very dirty, and 5 students in a 2BHK flat-type hostel. Tip: Take PG inside Shahbad village.

Faculty: Most faculty are like typical engineering college professors—very well-qualified but don't know how to teach or how to handle students. Tip: Don't hurt the ego of your professors. The course curriculum is not up to date. It doesn't make students industry-ready. Exams are not that difficult, but some professors do hard checking.

Other: I chose this college because I am not getting anything else. Fests are amazing.

Reviewed on 4 Jan 2025Read More

View All 66 Reviews

B.Tech. in Production and Industrial Engineering
at
DTU

Students also asked

Q: What is the fees for four year BTech at DTU?

The total tuition fee for the full-time BTech programme ranges between INR 6.06 and INR 6.42 lakh while the students who get into this college via Lateral Entry are required to pay a tuition fee of INR 2.97 lakh. Additionally, the total tuition fee for BTech (Evening) programme is INR 4 lakh. This structure of DTU fees for BTech, however, is sourced from unofficial sources. Hence is indicative. For the exact fee, students can reach out to the admission office or visit the official website for details. Additionally, for all BTech courses, aspirants are also required to pay a registration cum counselling fee of INR 1,500 on the official website of JAC Delhi which is non-refundable. When a student receives an admission offer, they are required to pay the admission fee charges (which are adjusted in the total fee) to confirm their seat.

View other answers

Q: Is BTech available at DTU?

Delhi Technological University offers a four-year BTech programme across 14 specialisations along with two BTech Evening programmes to the students. The duration of the BTech evening programme is also four years. The specialisations available under the regular BTech course includes CSE, Mechanical, Chemical, Civil, Engineering Physics, Mathematics and Computing specialisations, among others. Additionally, the specialisations available under BTech (Evening) course include Civil and Electrical Engineering. Students seeking admission must have a valid score in the JEE Main entrance exam. However, the final admission process is conducted via Joint Admission Counselling (JAC) Delhi. While for BTech (Evening), admission is completely based on merit scores obtained by the students in Class 12. Read more on BTech colleges in Delhi NCR.

View other answers

Q: What are the BTech salary packages offered at DTU?

The table below mentions the branch-wise highest and average packages offered to BTech students during DTU placements 2025:

BTech Branch	Highest Package 2025	Average Package 2025
COE	INR 64 LPA	INR 19.85 LPA
IT	INR 56 LPA	INR 16.62 LPA
SE	INR 85 LPA	INR 18.46 LPA
MCE	INR 48 LPA	INR 15.22 LPA
ECE	INR 48 LPA	INR 15.82 LPA
EE	INR 45 LPA	INR 12.89 LPA
ME	INR 31 LPA	INR 9.58 LPA
AE	INR 22 LPA	INR 9.1 LPA
PE	INR 20.85 LPA	INR 9.65 LPA
CE	INR 20.31 LPA	INR 9.2 LPA
ENE	INR 31 LPA	INR 10.96 LPA
CH	INR 21 LPA	INR 9.97 LPA
BT	INR 31 LPA	INR 11 LPA
EP	INR 31 LPA	INR 11.44 LPA

View other answers

Q: Can I get admission to the BTech course at DTU with rank between 30000 to 40000?

Delhi Technological University JAC Delhi cutoff 2024 has been released for admission to the BTech courses. The closing cutoff ranged between 8336 and 54432. Candidates with a 40000 rank have the opportunity to enrol in Delhi Technological University for certain BTech specialisations.

Candidates can refer to the table below to check out the specialisations available for admission up to 40000 rank in JAC Delhi at DTU:

Course	2024
B.Tech. in Civil Engineering	50194
B.Tech. in Production and Industrial Engineering	47199
B.Tech. in Environmental Engineering	53310
B.Tech. in Biotechnology	54432
B.Tech. in Software Engineering	14845
B.Tech. in Chemical Engineering	42504

View other answers

Q: Is BTech from DTU worth it?

Yes, BTech course is worth pursuing. BTech is the flagship course offered at DTU. Delhi Technological University courses are designed to provide various necessary opportunities and tools for creating skilled professionals with problem-solving, creative thinking, and a national development approach. BTech students are placed in top companies at top positions such as Samsung, Microsoft, Zomato, and others.

Got more queries?

AskShikshaGPT on App

Download exam sample paper

Want to know more about DTU Scholarship details?

Read about Scholarship

B.Tech. in Production and Industrial Engineering
at
DTU
Placements

Particulars	Statistics (2025)
Average Salary	INR 9.56 Lakh
Highest Salary	INR 17.73 Lakh

Top Recruiters for DTU

Adobe

Amazon.com

Apple

AT Kearney

Bain and Company

Bank of America

BCG

CITI Bank

Deutsche Bank

Flipkart

General Electric

Goldman Sachs

Google

HONEYWELL

HSBC

ITC

McKinseyCompany

Microsoft

PayTM

Qualcomm

RBS (Royal Bank of Scotland)

Samsung

Sandisk

Texas Instrument

UBS

United Health Group

View placement details

B.Tech. in Production and Industrial Engineering
at
DTU
Entry Requirements

General

OBC

Requirements for 12th grade Up Arrow Icon

60%
Applicants must have done Physics, Chemistry, Mathematics, and English(core or elective) as a subject with the above-mentioned marks as an aggregate from any recognised board. Applicants who have appeared at the annual examination in 2023 and have been placed in the compartment(supplementary) will not be eligible for admission for the year 2023.
Read more

JAC Delhi

JEE Main

Other eligibility criteria Up Arrow Icon

Candidate there is no minimum or maximum age criterion.

B.Tech. in Production and Industrial Engineering
at
DTU
Admission Process

Important Dates

ALL

JEE MAIN

JAC DELHI

Apr 2 - 8, 2026

JEE Main 2026 Exam Date Session 2

Apr 2 - 9, 2026

JAC Delhi-JEE Main 2026 session 2

Apr 20, 2026

JEE Main 2026 Result Date Session 2 on or before

B.Tech. in Production and Industrial Engineering
at
DTU
Cutoffs

Gender

Quota

JEE Main round-wise cutoff Rank: (General-All India)

Round	2023	2024	2025
1	12144	17176	11144
2	16080	18887	14428
3	16857	19146	15674
4	22539	22416	17578
5	21109	25875	18665

JEE Main round-wise cutoff Rank: (General-Home State)

Round	2023	2024	2025
1	48812	47199	42551
2	54804	51666	43558
3	54804	52366	44365
4	94858	52713	44365
5	69236	65734	51783

JEE Main round-wise cutoff Rank: (OBC-All India)

Round	2023	2024	2025
1	25694	32357	24890
2	27195	37054	27435
3	29279	45272	29563
4	38178	49002	30568
5	32151	54184	34091

JEE Main round-wise cutoff Rank: (OBC-Home State)

Round	2023	2024	2025
1	169766	173261	196464
2	206590	222778	207140
3	206590	237647	211806
4	223591	250644	220916
5	219954	317506	238229

DASA UG round-wise cutoff Rank: (General-All India)

Round	2018
1	-
2	-
3	-
4	1890

DASA UG round-wise cutoff Rank: (OBC-All India)

Round	2018
1	-
2	-
3	-
4	1890

JAC Delhi round-wise cutoff Rank: (General-All India)

Round	2023	2024	2025
1	12144	17176	11144
2	16080	18887	14428
3	16857	19146	15674
4	22539	22416	17578
5	21109	25875	18665

JAC Delhi round-wise cutoff Rank: (General-Home State)

Round	2023	2024	2025
1	48812	47199	42551
2	54804	51666	43558
3	54804	52366	44365
4	94858	52713	44365
5	69236	65734	51783

JAC Delhi round-wise cutoff Rank: (OBC-All India)

Round	2023	2024	2025
1	25694	32357	24890
2	27195	37054	27435
3	29279	45272	29563
4	38178	49002	30568
5	32151	54184	34091

JAC Delhi round-wise cutoff Rank: (OBC-Home State)

Round	2023	2024	2025
1	169766	173261	196464
2	206590	222778	207140
3	206590	237647	211806
4	223591	250644	220916
5	219954	317506	238229

View Cutoff Details

Explore Courses offered by DTU

Select the Degree you are Interested in

Select the Stream you are Interested in

Engineering

Science

Business & Management Studies

IT & Software

Humanities & Social Sciences

Design

Mass Communication & Media

Banking, Finance & Insurance

Other courses offered by DTU

B.Tech. in Electronics and Communication Engineering

4 years#30 NIRF

Seats Offered

240

Exams Accepted

Median Salary

– / –

Total Tuition Fees

₹7.4 L

Get Fee Details

B.Tech. in Computer Science and Engineering

4.34 years#30 NIRF

Seats Offered

480

Exams Accepted

Median Salary

– / –

Total Tuition Fees

₹7.4 L

Get Fee Details

B.Tech. in Mechanical Engineering

4.24 years#30 NIRF

Seats Offered

300

Exams Accepted

Median Salary

– / –

Total Tuition Fees

₹7.4 L

Get Fee Details

B.Tech. in Civil Engineering

4.24 years#30 NIRF

Seats Offered

150

Exams Accepted

Median Salary

– / –

Total Tuition Fees

₹7.4 L

Get Fee Details

View Other 105 Courses

Get best suited colleges for you in real-time

Here’s how it works:

Share your preferences with our assistant

Tell us about your city, course, budget & more

Get recommendations in no time

Discover best colleges that meet all your needs

It won’t take more than a minute!

Read B.E. / B.Tech reviews from DTU

Read Reviews Right Arrow Icon

Compare Courses From Similar Colleges

B.Tech. in Chemical Engineering

Offered by DTU - Delhi Technological University

B.Tech. in Production and Industrial Engineering

DTU

Student Forum

Anything you would want to ask experts?

Write here...

What are the minimum marks required in JEE Mains for admission in DTU?

Answered 5 years ago

Hi, please visit the link for more details:-https://www.shiksha.com/university/dtu-delhi-technological-university-dce-23920/admission All the best

konatham Abhishek

Scholar-Level 16

do we get a degree in mechanical engineering or in production engineering after 4 years, as PIE is a branch of mechanical engineering?

Answered 6 years ago

Hello Reet, You have taken admission in "Production & Industrial Engineering". Even though this branch may be sponsored by dept of mechanical engineering, you are bound to get degree in PIE only. Best wishes to you.

Group Captain Vinayak Deo

Scholar-Level 18

do we get a degree in mechanical engineering after completion of 4 years in PIE as its a sub-branch of mechanical engineering?

Answered 6 years ago

Hello Reet, Your query indeed is very interesting. Normally any new branch of engineering comes out of some or the other parent branch. This is so that enough support is provided to the new branch to stand on its own. However the degree invariably is given of the branch in which the student has take

Group Captain Vinayak Deo

Scholar-Level 18

Content authored by: