Computer Science Engineering colleges in India

No, SRM Vadapalani is not very expensive university but if students find it very expensive, worry there are scholarships available for students. The fee for the BTech course (tution fee) is INR 4 L - INR 14 L. The fee also have various components. Adding them gives us the total college fee. 

Yes, Amity University Mohali Punjab is a good university with IACBE, ACBSP (Management Programmes) accreditations. The university is recognised by UGC, Department of Science and Technology, Central Counselling Board, COA, & Bar Council of India. The university is spread aross 40+ acre of land. The placements are good in the university. Hence, it is a good university.

Admissions to various courses at the Jabalpur Engineering College is done based on the scores in various entrance exams such as JEE Mains, MPPET, MP BE. The cutoffs for all these exams for 2024 admissions have already been released. You can find the cutoff by visiting: Jabalpur Engineering College Cutoff 2024 (Out): Check JEE Main Round Wise Cutoff Ranks.

JSS Noida accepts JEE Main scores for admission to BTech. Check below the JEE Main 2024 closing rank for JSS Noida BTech:

Course	Round 1 (Closing Rank)	Last Round (Closing Rank)
B.Tech. in Civil Engineering	301454	430524
B.Tech. in Computer Science and Engineering	61681	71817
B.Tech. in Computer Science and Engineering(Data Science)	82484	95566
B.Tech. in Electrical and Electronics Engineering	141882	215544
B.Tech. in Electrical Engineering	172124	272478
B.Tech. in Electronics and Communication Engineering	111561	149744
B.Tech. in Information Technology	89608	105134
B.Tech. in Mechanical Engineering	261275	466364
B.Tech. in Computer Science and Engineering (Artificial Intelligence and Machine Learning)	76331	85466

K. K. Wagh Institute of Engineering Education and Research is a very renowned institute in Maharashtra, India, with quality engineering education and research. It was established in 1990 and offers various undergraduate and postgraduate programs in engineering, management, and applied sciences.

No, direct admission is not available at IIIT Ranchi. To get admission in IIIT Ranchi, Apply through JoSAA and score a good rank and fulfil the JEE Main cutoff.  And for the MTech programme candidates must qualify the GATE exam and apply via institution's official website. Non-GATE candidates can apply directly by meeting the eligibility criteria, written test and interview. Finally, for the PhD candidates can apply via the college official website and appear for the interview. 

Malla Reddy University Hyderabad offers BCom in 11 specialisations with a total tuition fee of INR 2.4 – 4 Lakh. Among these 11 specialisations, it also offers BCom (Hons) in Banking, Financial Services and Insurance as a 4-year course. Candidates must score an aggregate of 50% or above in 10+2 and clear the entrance exam of ISC, TSBIE or CBSE Class 12 exams.

Government Engineering College, Gandhinagar is certainly a decent choice for students looking for higher education in the Engineering filed in Gujarat state. A wide variety of course exist to choose from, like BTech, BE, MTech, etc., in different specializations. The specializations are offered through the 12 departments at GEC Gandhinagar.

The institute is UGC and AICTE-recognized and is offers courses that are affiliated with Gujarat Technological University. The infrastructure at GEC Gandhinagar is top-notch and is composed of calming greenery and modern amenities that produce the best of academic excellence.

DCRUST grants admission to UG courses on the basis of merit. Admission to all PG courses is granted on the score obtained in the entrance test conducted by the University. The University also accepts scores of National level exams such as JEE Mians, CAT, CMAT, GATE and NATA for respective courses. For admission to PG courses Once the candidates obtain the scores of the entrance test conducted by the University, they need to attend the counselling round this depends on course selection.

ADYPU School of Engineering Pune conducts admission based on entrance exam. However, valid entrance exam scores are required for admission to BTech and MTech. Although, BTech requires a minimum aggregate of 50% in Class 12 with specific subjects as a part of the Class 12 curriculum. For MTech, candidates must qualify BTech with reasonable scores.

So, for candidates seeking admission in BTech, reasonable Class 12 marks will suffice. However, the University also require ACET results along with PI, to shortlist candidates for final admission. 

The Silver Oak College of Engineering and Technology average package offered during the 2024 placement drive is yet to be released. Meanwhile, check out the average package offered in 2023 placements at Silver Oak College of Engineering and Technology:

Particulars	Placement Statistics (2023)
Average package	INR 3.60 LPA

Additionally, an improving trend in the average package was observed during Silver Oak College of Engineering and Technology placements between 2021 and 2023. For more clarity, check out the graph below:

The Silver Oak College of Technology average package offered between 2021 and 2023 is presented below: 

Particulars	Placement Statistics (2021)	Placement Statistics (2022)	Placement Statistics (2023)
Average package	INR 3 LPA	INR 3.50 LPA	INR 3.60 LPA

Note: The average packages mentioned above are the overall average packages offered at Silver Oak University.

The seats availability for offered courses at KGEC - Kalyani Government Engineering College goes up to 430. Courses offerred by KGEC - Kalyani Government Engineering College are approved by eminent Government bodies such as AICTE.

L.J. Institute of Engineering and Technology (L.J.I.E.T) is a well-known institution for B.Tech, M.E./M.Tech, MBA/PGDM, MCA courses. These programs are delivered by highly experienced faculty. As per Shiksha verified reviews, L.J. Institute of Engineering and Technology (L.J.I.E.T) has a rating of 4 on the basis of reviews by students. Not just this, it has also been rated 4 on campuslife, 3.7 on placements, 4.3 on faculty and 4.1 on Infrastructure.

Aspirants are offered admission in BTech programme of Dronacharya College of Engineering based on their JEE Main scores or HSTES Counselling. The college selects candidates for M.Tech based on their GATE or qualifying exam scores.

CUCET 2026 application form process for Phase 1 is now available. Candidates can now access and fill out the application form of CUCET 2026 online and offline before the final date i.e., May 30, 2026. 

Dr. D.Y. Patil Institute of Engineering Management and Research, Akurdi provides various programmes and specialisations to students. These courses are available in different streams. For obtaining DYPIEMR admission, candidates are selected on the basis of entrance tests. For further details, candidates may visit the official website and learn more regarding the eligibility details for their preferred course choice. Accepted exams include JEE Main and MHT CET.

SIES Graduate School of Technology has been rated 4.04 for Faculty as per the Shiksha verified reviews by students. This represents that Institute has decent, qualified and experienced faculty members.

Bharati Vidyapeeth College of Engineering offers a BTech in Mechanical Engineering which is a 4 year programme offered with an annual intake of 120 students. The Institute offers admission to the respective course based on Class 12 or its equivalent examination with Physics and Mathematics as compulsory subjects along with one of the Chemistry/ Biotechnology/ Biology/ Technical Vocational subject/ Computer Science/ Information Technology/ Informatics Practices/ Agriculture/ Engineering Graphics/ Business Studies/ Electronics/ Entrepreneurship. Candidates must have obtained at least 45% (at least 40% marks, in case of  Economically Weaker Section belonging to Maharashtra State only) in the above subjects taken together are eligible to apply. In addition to this, candidate must have appeared in all the subjects in MHT-CET and should obtain non zero score in MHT-CET.

IIIT Manipur ECE students are taught Control systems, CMOS design, Image and Computer Vision, Machine learning, Artificial Intelligence, and various other skills. IIIT Bhagalpur Mechatronics students are taught Design of Machine Elements, Electrical Sciences, Computer Programming, and various other skills required in Mechatronics. The decision to take which specialisation depends on the future career dreams of the students. Both courses are quite good and meets the industry standards.