Biomedical Engineering colleges in India

It depends on the level of the Diploma you choose. If you opt for a UG Diploma in Biomedical Engineering you'll need to fulfill the eligibility requirements, the same as the BTech course. 

And if you opt for a PG Diploma in Biomedical Engineering, then you would need to fulfill the requirements, the same as the MTech course.

BME Course Levels	BME Course Eligibility Criteria
UG Diploma in Biomedical Engineering	Students must have passed Class 12 (Science Stream) with Physics, Chemistry, and Mathematics/Biology as mandatory subjects. Minimum marks requirement typically ranges between 50 percent and 60 percent, depending on the institution.
PG Diploma in Biomedical Engineering	Completion of a 4-year B Tech Bio medical Engineering or a closely allied field (e.g., Biotechnology) from a recognized university. Students must secure at least 55% marks in graduation.

Note - The information is taken from external sites and may vary.

Know more about -

Biomedical Engineering Courses

It depends on college to college. Colleges like North Eastern Hill University and Jadavpur University have a much more affordable fee range under INR 10,000. But colleges like VIT Vellore, Graphic Era, Amrita Vishwa Vidyapeetham, SRM, etc., have a fee range between INR 3 to 7 lakh.

Know more about -

Biomedical Engineering Colleges

More than 60. Where around 36 are private, and 26 are government bodies. These include IIT Bombay, VIT Vellore, IIT Delhi, SRM Institute of Science and Technology, NIT Rourkela, IIT BHU, and so on top options.

Know more about -

Biomedical Engineering Colleges

There are around 58 MTech Biomedical Engineering colleges in India. Where around 32 are private colleges and 26 are govt. colleges. Some top student choices in terms of academic excellence, campus vibes, and placements include the

• top IITs
• VIT Vellore
• NIT Rourkela
• SRM Institute of Science and Technology
• Jadavpur University
• College of Engineering, Pune

Know more about -

Biomedical Engineering Colleges

ADYPU School of Engineering Pune conducts admission based on entrance exam. However, valid entrance exam scores are required for admission to BTech and MTech. Although, BTech requires a minimum aggregate of 50% in Class 12 with specific subjects as a part of the Class 12 curriculum. For MTech, candidates must qualify BTech with reasonable scores.

So, for candidates seeking admission in BTech, reasonable Class 12 marks will suffice. However, the University also require ACET results along with PI, to shortlist candidates for final admission. 

Biochemical engineers are like chefs for biological processes. They use microorganisms and enzymes to produce valuable products like drugs, food and biofuels.

Biomedical engineers are like mechanics for the human body, designing and building technologies to diagnose, treat, and improve human health. To understand the exact difference between these two. Take a look below

Feature	Biochemical Engineering	Biomedical Engineering
Focus	Applying biological principles to chemical and industrial processes	Designing and developing medical devices and technologies
Core disciplines	Biochemistry, Microbiology, Chemical Engineering, Thermodynamics	Biomaterials, Physiology, Anatomy, Biomechanics, Signal Processing
Main applications	Production of drugs, food, biofuels, bioremediation	Medical devices, prosthetics, implants, diagnostics, imaging
Work environment	Chemical plants, food processing facilities, biotechnology companies	Hospitals, research labs, medical device companies
Job titles	Fermentation Engineer, Bioprocess Engineer, Food Product Developer	Biomaterials Engineer, Medical Device Engineer, Clinical Engineer
Skill emphasis	Process design, mass transfer, fermentation, biocatalysis	Materials science, electronics, computer modeling, tissue engineering
Overall approach	Optimizing industrial processes using biological systems	Applying engineering principles to solve medical problems

Note - The information is taken from external sites and may vary.

Know more about -

Biomedical Engineering Courses

It is very important to have some key technical skills. It may be learned during internships, workshops, and lab sessions. You can check out some important skills given here for reference

• Excellent Knowledge of Engineering Principles
• Biomechanics and Biomaterials Expertise
• Strong Expertise in CAD Software and Tools
• Understanding of Biomedical Sciences & Ethics
• Bioinformatics and Data Analysis

Yes, Galgotias University offers decent placements annually for courses like BTech, MTech, MBA, MCA, etc. As per the latest report, the highest and average package offered during Galgotias University placements 2026 stood at INR 60 LPA and INR 5.4 LPA, respectively. The key highlights of Galgotias University placements for the Class of 2026 are tabulated below:

Particulars	Placement Statistics (2026)
Highest package	INR 60 LPA
Average package	INR 5.4 LPA
Total recruiters	1200+
Total offers	3055+
Niche offers	300+
Top recruiters	Commvault, Amazon, Accenture, Cognizant

In JISCE every course is best in their domain but as far as the innovation, research and holistic studies are concerned ECE (Electronics and Communication Engineering) is the best engineering course. CSE and CST are also equally best as the demand is very high for these course.

Yes, Integral University offers good placements for courses like BTech, BPharma, MBA, etc. Check out the overall highlights of Integral University placements for the overall Class of 2025 from the table below:

Particulars	Placement Statistics (2025)
Highest package	INR 26 LPA
Total recruiters	225+
Total offers	1200+
Top recruiters	Amazon, Infosys, Flipkart, IBM

 Adi Shankara Institute of Engineering and Technology offers a large diversity of courses to students in Management field.  Adi Shankara Institute of Engineering and Technology admissions are held on the basis of entrance tests. Students seeking course admissions must clear their previous qualifying examination and appear for any of the prescribed entrance exams such as KMAT Kerala, CMAT, among others. Students can visit the official website to learn more regarding the course-wise eligibility and specialisation details.

Karunya Institute of Technology and Sciences has been ranked by various ranking bodies for its Management, Engineering, and several other programmes. The below-mentioned are the national and international Karunya University rankings:

Ranking Body	Ranks
Asian University Rankings - Southern Asia 2026	212
Asian University Rankings 2026	694
QS Sustainability Ranking 2026	1401-1500
QS Asian University Rankings - Southern Asia 2025	212
QS Asian University Rankings 2025	681-700
QS Sustainability Ranking 2025	1301-1350
NIRF 2025 under the University category	101-150
NIRF 2025 under the Engineering category	101-150
NIRF 2025 under the Overall category	151-200

LPU does not offer direct admission. However, admission to few courses is merit-based.  Aspirants scoring a 65% aggregate have a good chance of getting admission in LPU. Candidates seeking admission must visit the official website of the university to apply online. To apply for LPU, aspirants need to register for LPUNEST for admission to undergraduate and postgraduate courses. LPU admission to most of the courses is based on LPUNEST score. However, national-level entrance exam scores are also accepted for admission to BA LLB (Hons), MBA, BTech, etc. Candidates must complete Class 12 for UG courses and graduation for PG courses. The selection rounds are followed by counselling and document verification.

Agni College of technology provides great placements to its students with good packages. Refer to the table below to know more placement statistics recorded in the recent years:

Particulars	Placement Statistics (2024)	Placement Statistics (2025)
Placement rate	95%	96%
Offers Made	523	648
the highest Package	INR 50 LPA	INR 49 LPA
Average Package	INR 4.40 LPA	INR 4.60 LPA
Companies Visited	141	148

UPES (Admission Office) accepts various entrance exam scores for admission to different courses. For B.Tech. admissions, the university accepts UPESEAT, JEE, Board Merit, SAT, and CUET scores. For MBA admissions, the university accepts CAT, MAT, XAT, CMAT, NMAT, and UPESMET scores. Admission to M.Des. and B.Des. courses is based on the valid score of CEED or UPES DAT followed by a presentation and interview. BBA admission is done through UPESMET-UG and through National Level Tests. Admission for LLB courses is based on the score of ULSAT or CLAT/LSAT scores. The eligibility criteria and minimum marks required for different courses can be found on the UPES website

Vel Tech Rangarajan Dr. Sagunthala R and D Institute of Science and Technology provides various programmes and specialisations to students. These courses are available in different streams. For obtaining Vel Tech admission, candidates are selected on the basis of entrance tests. For further details, candidates may visit the official website and learn more regarding the eligibility details for their preferred course choice. Accepted exams include VTUEEE, CLAT, TANCET, etc.

Yes, SRM Institute of Science and Technology, Tiruchirappalli is approved by the AICTE. Management Entrance Test is conducted by the University to grant admission to the eligible candidates for its MBA programme.

Candidates applying for a course at Saveetha Engineering College, Chennai must fulfil the eligibility criteria. The basic eligibility is Class 12 for UG and graduation for PG courses. Below is course-wise eligibility at SEC Chennai:

Course Name	Common Eligibility
MBA	Graduation with at least 50% aggregate
BE/ BTech	Class 12 with Physics, Chemistry and Mathematics with a minimum of 45% aggregate
ME	Pass graduation with a minimum 50% aggregate with relevant subjects

Parul University Vadodara is a private university that was established under the Gujarat Private Universities (Second Amendment ACT and is accredited with an A+ Grade by NAAC (National Assessment and Accreditation Council), NABH, Central Council for Homeopathy, Bar Council of India, and the National Medical Commission. Being a private university, the fee for various courses can be a little high but the students can apply for scholarships offered by the university. The scholarships offered by the university are Cultural Scholarships, Sports Scholarships, and Defence Scholarships.

Yes, JNN Institute of Engineering does give courses in the Management stream. Students can opt for the popular Master of Business Administration programme offered by JNN Institute of Engineering Chennai. The MBA course is offered in different specialisations as well. The specialisations include HR, Finance & Marketing, Artificial Intelligence & Data Science, and Business Analytics.

Centurion University of Technology and Management (CUTM) usually favors higher JEE Mains percentiles in their selection process.

A candidate requires 250 marks in JEE main to obtain 90 percentile. A percentile between 90 to 95 or holding ranks between 14,000 and 45,000 can be considered good for getting admission to top colleges. 

For B.Tech admission,

• CUTM considers CUEE merit and PI or JEE cut-off.
• CUTM also requires a minimum of 60% aggregate marks in Class XII with Mathematics, Physics, Chemistry, and English as subjects.

However, at Centurion University of Technology and Management, Andhra Pradesh, generally CUEE and AP EAMCET ranking are considered. The last round ranking for AP EAMCET is 6169 in the year 2022.

Yes, Dhanalakshmi Srinivasan University offers scholarship to deserving and meritorious students for research scholars. The doctoral fellowship (DSU-Doctoral Fellowship) shall be awarded to the meritorious full-time research scholars based on the recommendation by the selection committee and approval by the Dean - Centre for Research. A stipend of INR 20,000 per month will be provided by DSU for the eligible candidates. In addition to the stipend, a contingency grant of INR 50,000 per annum will also be supported to the candidates.

Kings Engineering College is a good institution for B.E. / B.Tech, M.E./M.Tech courses, and these programs are delivered by highly experienced faculty. Major specialisation at Kings Engineering College are Computer Science Engineering, Information Technology, Mechanical Engineering, Electronics & Communication Engineering, Artificial Intelligence & Machine Learning, Biomedical Engineering, Robotics Engineering.

The tuition fees at GD Goenka University for all the courses costs about INR 35,000 to INR 84.8 L. This fee is exclusive of other components like exam fees, admission or application fees, security deposit, etc. The fee depends on the chosen course and specialisation.

MIT School of Bioengineering Sciences & Research in Pune, Maharashtra offers several top courses: 

Bioinformatics

Biomedical Engineering

Biotechnology Engineering

Environmental Engineering

Biotechnology

B.Tech. in Bioengineering:

M.Tech.:

B.Tech + M.Tech

Ph.D

The curriculum introduces students to subfields of biotechnology, bioinformatics, and biomedical engineering. 

Here are some fees for courses at MIT School of Bioengineering Sciences & Research: 

B.Tech: INR1.9 lakhs

M.Tech: INR1.9 lakhs

B.Tech + M.Tech: INR2.77 lakhs

Ph.D: INR1 lakh

School of Health Sciences and Technology at UPES features unique, modern infrastructure designed for immersive learning, integrating advanced technology with healthcare education. Campus offers specialised labs for Biotechnology and Health Informatics, high tech classrooms & collaborative spaces designed to foster innovation, set within safe green environment in Dehradun. 

Course	Seat Intake
BTech	690
MTech	72

Manipal Institute of Technology, MAHE tuition fee ranges between INR 1.2 L – INR 15 L for various courses. This fee is exclusive of other components, such as examination fee, application fee, etc. Therefore, Manipal Institute of Technology is moderately costly, in comparison to other engineering institutes.