GATE Result 2026: Scorecard Released, Toppers List OUT, Branch-Wise Cutoff

40 marks in GATE will approximately give a rank between 2000 to 5000 depending on the paper difficulty level and the number of registered candidates in that particular branch.  Obtaining 40 marks is mainly considered average, opening chances to a few new IITs (less popular branches) and NITs.

However, rank for 40 marks in the Graduate Aptitude in Engineering can give a different rank value for different branches and disciplines. For example, 40 marks in GATE CSE can correspond to 9000 to 10000 rank. On the other hand, 40 marks in GATE ME, can correspond to 6000 - 7100 rank. 

Advice to students who secured 40 marks in GATE exam: Better to apply in some state-level colleges or new NITs. 

Candidates can check their result at gate2026.iitg.ac.in. To access result link of GATE 2026, enrollment ID and password is required.

Indian Institute of Technology released GATE cutoff 2026. The IITG GATE 2026 result has been declared. The conducting body releases the exam result and cutoff for all 30 subjects. The cutoff for GATE 2026 is available category-wise. Candidates securing the minimum cutoff will be eligible to participate in counselling. 

Note: The minimum qualifying cutoff is different for all subjects. 

IIT Guwahati declared GATE result for 2026 on March 19. Candidates can now login with their credentials to download result.

No, objections cannot be raised after the declaration of GATE results. Candidates can only challenge provisional answer key. 

Candidates who have passed GATE exam can download scorecard. The validity of GATE exam scorecard is three years. It is now available at GOAPS portal. Candidates use their enrollment ID and password to download.

After the declaration of GATE result, the qualified candidates will have to participate in counselling process. It must be noted that, IIT Guwahati does not conduct GATE counselling. 

Admission counselling is done by COAP and CCMT portals. 

• Common Offer Acceptance Portal (COAP) is the centralised portal for counselling used by IITs and IISc that allow GATE qualified candidates to view and accept choices for M.Tech or PSU jobs based on their scores. 

• On the other hand, CCMT (Centralised counselling for MTech/MArch/M.Plan) portal used for offering M.Tech admission to NITs, IIITs, and GFTIs. 

The details regarding the total number students obtaining full marks in GATE 2026 will be available along with result. Candidates will be able to check complete stats on official website as well as here on this page.

IIT Guwahati will release GATE CSE topper 2026 after the announcement of result. Once released, candidates will be able to check GATE CSE 2026 topper's name, AIR, along with raw marks and GATE 2026 scores. 

Balamurugan was the GATE 2025 topper in the Aerospace Engineering branch/discipline scoring 81 marks out of 100 (with a GATE score of 990 out of 1000). Last year, 7576 candidates registered for the GATE AE paper, out of which 6009 candidates appeared for the exam. 

GATE qualification is relatively low compared to other postgraduate engineering entrance exams. On average, acceptance rate falls between 15 - 20%. 

Last year, as per statistical report, out of 936019 registered candidates, 747319 candidates appeared, and 8761 students qualified. 

Overall, general cutoff usually remains around 25 -30 marks out of 100 marks. However, for PSUs 75 to 85 marks are considered as a safe qualifying rate. 

The cutoff score in GATE is the minimum mark required to qualify for the exam. The conducting body releases the qualifying cutoff along with result. It determines, whether a candidate is eligible to participate in the counselling round or not. 

The cutoff score in GATE varies every year (category-wise), depending on the number of students registered, difficulty level of the question paper, and previous year's trends. The GATE cutoff score are mainly of two types - admission and qualifying cutoff.

Yes, it is expected that the GATE 2026 cutoff may increase compared to last year, for the following reasons -

• Increase in the number of registered applicants.

• Difficulty level of the question paper

• Inclination towards newer branches, such as Data Science, Machine Learning, Quantum Tech, etc. 

• Due to the introduction of new and innovative programmes, there can be slight increase in the cutoff trend, especially for CSE, EE, EC, DA, CE and ME

The GATE scorecard on 2026 will be valid till 2029. With the help of GATE result scorecard, qualified candidates can apply for M.Tech and PhD at IITs, IISc, NITs, and other engineering colleges in India. With valid GATE scorecard, applicants can also apply for PSU recruitments, such as NTPC, GAIL, AAI, BHEL, etc.

Yes, GATE rank is valid for three years. However, some PSUs might not accept previous year's GATE scorecard. Therefore, it is better to go through guidelines and official notification before applying. If a candidate has more than two GATE scorecard, then they must use the one with best score and rank. 

GATE 2026 scorecard will be made available for free download from March 27 to May 31. Later from June 1 to December 31, the scorecard can be downloaded by paying a fee of INR 500. The GATE scorecard 2026 will remain valid till 2029.

After the release of GATE result, candidates must check refer to the college predictor to check their chances of which college they can get with their scores. This will give a brief idea to list out college and institute options and stay prepared before the counselling process start. 

It must be noted that, IIT Guwahati will not conduct counselling. The process will be done in two portals - COAP for IITs admission and CCMT for NITS, IIITs, and GFTIs. 

Before the GATE scorecard is officially available at GOAPS, students must check the previous year's cutoff of the college choices and analyse when to apply and which branch to target. Once the counselling process of GATE starts, candidates must register and participate as per the instructions. 

Students who want to apply for PSUs, must keep a track of the organsiations and PSUs and apply on the given dates.

Securing 2500 rank in GATE is considered good. With this rank, you can get admission to new IITs, top NITs and IIITs as well. However, opportunities for PSU jobs can be limited.  GATE AIR of 2500 can roughly correspond a GATE score of 670 to 750. 

• Possible NITs include - NIT Trichy, NIT Suratkal, NIT Calicut
• New IITs - IIT Bhilai, IIT Patna, IIT Mandi, etc. 

Many new NITs do accept 500 score in GATE for M.Tech admission. Here are some NITs that accept GATE scores between 400 - 500 -

• National Institute of Technology, Tiruchirappalli

• Visvesvaraya National Institute of Technology, Nagpur

• National Institute of Technology, Silchar

• National Institute of Technology, Warangal

• NIT Mizoram

• NIT Raipur

• NIT Agartala

• NIT Arunachal Pradesh

Many new IITs do accept low GATE scores for M.Tech admission. Some old IITs also accept low GATE score, depending on category and other factors. Here are some IITs that accept low GATE scores for admission. 

• IIT Bhubaneswar

• IIT Mandi

• IIT Bhilai

• IIT Ropar

• IIT Jodhpur

These IITs mainly accept GATE scores starting from 330 to 400 (General Category), mainly in Round 4 or 5 of COAP counselling.

Securing 25 marks in GATE is just reaching the qualifying cutoff. For SC/ST or PwD applicants, 25 marks can be average and safe for securing good GFTIs. However, targeting core branches can be impossible.

In addition, 25 marks in Graduate Aptitude Test in Engineering can give different results, based on the paper you have applied for. 

For example, 25 marks in GATE CSE or ECE can fetch you a lower rank. While 25 marks in GATE AG or CY might give you good options during counselling (due to low competition).

For now, there are no updates regarding how many candidates have registered and appeared for GATE 2026 exam. IIT Guwahati will release candidate's stats on its official website along with minimum qualifying cutoff marks and results. Meanwhile here is the stats last 5 years of number of candidates registered and appeared in Graduate Aptitude Test in Engineering -

The GATE normalisation process is mainly done for the papers which is conducted in multiple sessions, to ensure fairness across different difficulty level. The GATE normalisation process uses the formula based on mean and standard deviation of marks from all sessions. 

The normalisation process in GATE is done for computer Science and engineering (CSE) and civil engineering paper (CE).